Search results

  1. silverado13

    porting your MAF sensor

    porting your MAF sensor is not difficult by any means but it is just time consuming and takes patience first thing you need to do is take apart the MAF sensor into 3 pieces, 2 sides of the casing and the black center piece that is the actual sensor, the sensor should be put in a safe place...
  2. silverado13

    1997 K1500 Z71

    just thought id put it here along with craigslist, im selling my z71, let me know if anyone has any intrest
  3. silverado13

    posi identifier?

    So I had a 3.73 posi in mh truck when I bought it, I blew that rear end, and had to replace it in a hurry, I went to the junkyard and thought I had a 3.73 but after putting it in and putting it in 4wd realized that I more then likely have a limited slip 4.10 rear end. Soooo my question is. Does...
  4. silverado13

    body lift question

    I'm okay with installing the body lift as far as lifting the body and the issue with the rear bumper and break lines but my only concern is what needs to be done with the steering column as to where it goes to the steering gear box
  5. silverado13

    front cv question

    so my drivers side front cv shaft is absolutely shot, as in it makes grinding noices even when im going in a straight line, problem is im not going to have the time to fix it for about a week and a half, and ive seen worse case situations where the cv snaps and actually punches a hole in the...
  6. silverado13

    need help identifying a part

    http://www.manualtransmissionpart.com/mm5/graphics/pdf/np243-2012.pdf part 440, does anyone know what this part is and what does it do? im not getting power to my front axles actuator, so i pulled the entire harness for the 4x4 and using a multimeter found out that the connecto for the...
  7. silverado13

    question for people who tune

    i know this is going to seem like a very amatuer question, but those people using efi live and other tuning programs, how are you connecting you computers to your obd2 ports? i saw on the internet that they have obd2 to USB cables, is that what people use?
  8. silverado13

    0-60= quarter miles time

    I was wondering if someone could give me a 1/4 miles estimate. I timed my truck and it does 0-60 in 7.3 seconds. Never brought it to the track but curious what id be running
  9. silverado13

    stock l31 heads

    im looking for a pair of project stock heads
  10. silverado13

    pushrod sizep

    1997 k1500 350......what size push rods do I need?
  11. silverado13

    engine top wmd question

    I'm starting to get some valve raddle so I've been thinking of picking up an extra set of heads and rebuilding my top end. I already know I'm going with 1.6 rocker arms but I honestly dont know anything about the push rods or litters I need. Can anyone inform me?
  12. silverado13

    411 pcm with e fan swap, question

    this question goes out to the people who have done he 411 swap with e fan, i did my pcm swap about a year ago, then added fans maybe 6 months ago, and i just realized the #1 fan hasnt beeen working, the inline fuse has been blowing consistantly, considering that the wiring is pretty straight...
  13. silverado13

    brake light help...again

    alright, so my brake lights havent worked for a while now, i thought it was the brake light switch but i replaced that yesterday, this is where things get interesting, so yesterday when i replaced the brake light switch, i checked the brake lights and they worked but when i was wrapping things...
  14. silverado13

    break light switch replacement help

    im working on replacing my brake light switch, i live in louisiana and you have to be time efficent working on your truck during the summer due to the heat, that being said, i was tinkering with the old brake light switch trying to get it off but apparently there is some trick to it and after...
  15. silverado13

    door lock help

    im trying to find the replacement part for the door latch but i seem to be having a hard time figuring out what exactly its called, but im looking for the part of the door that actually latches onto the pin to keep the door closed, mine on both driver and passenger doors malfunction from time to...
  16. silverado13

    brake light help

    alright so ive had my brake lights out for a couple weeks now and today i actually started tinkering with it but didnt get any result, so i started offf by removing my tail lights and the light assembly from the tail light to i could see it better, anyways the bulbs were fine, i switched the...
  17. silverado13

    new alternator will it help

    I did the 411 pcm swap with 2 16". Efans. Well i kinda assumed id have this problem but my 105 amp alternator is having a hard time keeping up with the demand of the 2 fans plus my HIDs don't help. Cold start up I get 14 volts. When the first fan kicks on I drop to about 12.5-12.9 volts. Well...
  18. silverado13

    stock black box pcm

    1997 k1500, 5.7, 4l60e 3.73 gears, i left my hypertech programmer, programmed on it becasue the handheld itself broke, but i have it laying around becasue i did a 411 swap, id take just about anything for it
  19. silverado13

    throttle body spacer

    i really don't believe all the hype about throttle body spacers increasing horse power by that much but I'm currently designing an intake that runs forward instead of to the passenger side, problem is that a/c hard line is in the way so i want to get as big of a throttle body spacer as possible...
  20. silverado13

    chevy full grille

    i need a newer style obs grille for my 1997 chevy silverado, mines cracked pretty bad so im looking for one in better condition
  21. silverado13

    where are you getting your grills from

    who ever owned the truck before me said they went through a fence and a mailbox with my truck, only damage is the bumper has a small dent, the hood has a dent, the bow tie got knocked off and the front grill is cracked in a few places, well over the years of having the truck my main focus has...
  22. silverado13

    black stock z71 rims

    im pretty sure this is the right place to post this but im considering painting my stock Z71 rims black, but im not really sure how it would look, can any one post a pic of how they look?
  23. silverado13

    the new intake im going to go with??

    has anyone ever gone with a dual intake setup, i have a intake throttle body lid off of a van or something thats gonna allow me to run my intake straight forward instead of to the side, then im thinking about going with a intake splitter off of a after market ram intake and have 2 filters...
  24. silverado13

    head light help

    So I have a 97 z71. And my head lights are always on when the key is on. That's how its been since I got it. I have a problem with that because my HIDs are always on and draw extra power and burn out a lot faster then needed. So I've heard its that there is a simple modification that you can do...
  25. silverado13

    411 pcms

    id been getting alot of request for esky clusters and 411 pcms so i went to the junkyard and was looking for them for people, found one esky cluster but it was broke, but i did find 2 411 pcms and bought them, if anyone wants to buy them im selling them at really good prices

Latest posts

Staff online

Members online

... and 11 more.
Total: 1,571 (members: 61, guests: 1,510)

Forum statistics

Threads
64,465
Messages
1,394,700
Members
51,730
Latest member
oLordGrim

Share this page

Top