Search results

  1. N

    Can I use a morse floor shifter from a turbo 400 on a 4l80e? Are there any other junkyard shifters?

    I'm hoping that the morse turbo 400 floor shifter will work on my 4l80e and just will not let me into 1st gear since its one gear short. Would this work? Does anyone know of some junkyard options for floor shifters? I can live with PRND at a minimum, but I would like all the gear options of...
  2. N

    i have a fuel tank from a 1995ish model? will it fit on a 1998?

    i have a fuel tank from a 1995ish c1500 model? will it fit on a 1999 c2500? The circular caps are different so I would need to use my original one, but is the rest of the tank the same or close enough?
  3. N

    c2500 front coil springs shot?

    the alignment shop says my front coil springs are shot. Does this happen often? I'm running a heavier cummins and have around 230k miles on my c2500. Does anyone have a coil spring brand recommendation?
  4. N

    added 1.5 poly coil spacer and now im getting shaking at 65-70+mpg

    this sound normal? I'm about to remove them and it sucks because I spent a few hour installing them. I dont know if they actually provided any lift when it was complete... Maybe I need an alignment? https://www.pepboys.com/product/details/271374/01477
  5. N

    is there really only 1" different between the front and rear of a 1999 c2500 CCSB?

    I thinking about getting a coil spacer leveling kit and i figured there was at least 2inch gap between the front tire and fender wheel @ 5inches compared to the rear tire / rear fender @ 6 inches. I have measured it twice and its only a 1" difference, but that just doesnt seem correct. Am I...
  6. N

    what remote did this truck have? its a 1999 serria slt C2500

    This truck came loaded and it has power locks so I'm guessing it had keyless entry also. Did it have the classic style 1998 remote or the black 1999 remote? https://www.amazon.com/Keyless-Entry-Remote-Clicker-Blazer/dp/B000KZ23SM <= is this the remote? Thanks Nick
  7. N

    photochoping my CCSB

    before added a body lift, tint, painted the camper and added a roof rack+spare. killing time because i cant sleep. I think it will need some nerf bars after the body lift.
  8. N

    used crew cab short bed nerf bars?

    I have a c2500 crew cab with a short bed . There arnt that many of these guys at the junkyard. What else can I get some used nerf bars from? maybe a suburban or a 4 door tahoe? ? Thanks Nick
  9. N

    custom swap, trying to figure out the AC. I both plugs going to the compressor have 12v

    I did a custom swap and removed the chevy 5.7 and dropped in a cummins. I had to rerun many wires so its very possible that I screwed up the wiring. I took my multimeter and started testing the plugs. At the compressor I have 12v from the plug by the pulley. This 12v seems like its always...
  10. N

    I broke the ac line going to the dryer. What's the trick to remove it?

    I have to replace the ac line that goes to dryer from the compressor. It feels like I'm going to break the dryer trying to get the ac line loose. What's the trick? Thanks
  11. N

    is there a factory intercooler in any gmt400?

    I'm curious if there are any factory intercoolers for the gmt400. I dont really want to hack up my truck to get an intercooler installed if there is a stock configuration.
  12. N

    can ABS from a 1999 c2500 work with a carbed engine?

    I no longer have the original engine and I'm not using the original engines's computer, but its still connected. Can ABS still work? my ABS light kicks on shortly after starting the truck and ABS used to work before the swap.
  13. N

    is the front of a c2500 CC about 1 inch wider than the back? I want get some hub centric spacers

    I added fender flairs and now my tires look really narrow. I have a 2wd c2500 1999 crew cab. see pictures So I measured the rear then the front to see how much of a gap I have from the tires sidewall. looks rear tire is around 3.5 inches narrower to the top of the fender flair and 3...
  14. N

    rear drums arent coming off a 14 bolt semi float

    I just pulled the wheel off and tried to pull off the drum. Is there anything else I need to remove? btw I'm also trying PB blaster to help.
  15. N

    I have a bolt on yoke 4l80e and i think i was sold a 4l80e with a slip yoke. options?

    I purchased a rebuilt transmission and when i tried to bolt on the yoke it moved too close the the actual housing and didnt have a gap like the old 4l80e transmission. I'm guessing this rebuilt 4l80e uses a slip yoke. If I use a slip yoke do I have to change the length of my driveshaft? If...
  16. N

    bolt on yoke torque spec?

    I have a 4l80e with a bolt on yoke and I dont know that the torque spec should be. I have googled it but, I can find that specific spec. Thanks Nick
  17. N

    4l80e Bolt in yoke has very slight groove line

    Should I go with it or buy a new one? Can I buff the line out? It has around 220k on the old yoke.
  18. N

    Thanks for the how-to videos on YouTube.

    i watched a few of those videos and the are very helpful. Thanks!
  19. N

    did my 1999 CCSB C2500 w/ 5.7 4l80e come with a trans cooler inside the rad?

    i burned my 4l80e by not putting a fan on my truck after I swapped in the 4bt. someone asked about my trans cooler inside the rad, but my truck doesnt have one. it only has the external and the lines look factory with the GM clips. So i did a quick search online to see what the rads look like...
  20. N

    water in the headlight, what is that seal called?

    I searched and I know this topic must be covered, but I couldnt find it. I have water in my driver side head light and its most likely the dry rotted seal is destroyed that fits between the lens and the light clip. What is that seal called? I tried to find it at the local parts store, but I...
  21. N

    will a 2004 3500 van 4l80e replace in a 1999 c2500 4l80e?

    my 4l80e tranny is gone and i found one on craigslist, but its a 2004 4l80e. will that fit on a 1999 c2500 ? Thanks Nick
  22. N

    about 800 miles after cummins swap and 4l80e will not move forward.

    It will go into reverse just fine and pull the truck up a steep hill backwards. I have no power moving forward. I added more fluid and more fluid. I was able to drive it around for a few miles then I came home and parked it. On startup its not moving again. I added more fluid and looked for...
  23. N

    how can i run AC without the ecu? 1999 c2500

    I removed the old 350 and put in a diesel so I dont use the ecu anymore. I'm guessing the ac will not start because the ECU thinks the engine is off.
  24. N

    1999 C2500 speedometer wire. Please help.

    I just put in a diesel and I no longer use the ECU for the speedometer. Can someone give me the cluster diagram or tell me which of the wires coming out of the ECU goes to the speedo? I have been looking for two days and I cant find anything with google. Many Thanks Nick
  25. N

    DRAC / VSSB location? its not in behind the glovebox

    i have a 1999 c2500 CCSB and i need to find the DRAC / VSSB. Anyone know where its located? I've searched behind the dash and behind the glovebox.

Latest posts

Members online

... and 15 more.
Total: 1,536 (members: 65, guests: 1,471)

Forum statistics

Threads
64,464
Messages
1,394,688
Members
51,728
Latest member
Car_Guy_YYC

Share this page

Top