Cooling fan is a Delta Electronics AFB0412MA.
You must be registered for see images attach
You must be registered for see images attach
Going to replace it with a Delta Electronics
AFB0412MA-A. Fan is 40 mm x 40 mm square (L x W) and 10 mm wide, 12 DCV.
Stock fan is 0.10 A per nameplate, which suggests 1.2 watts (12 V*0.10 A=1.2 W). The AFB0412MA-A is 0.03 A and 0.36 W, per the spec sheet. Sounds like an improved design.
Fan has a two-wire terminal connector. Still trying to figure out what kind of connector it is. I think it's Molex PicoBlade but trying to confirm. I think the replacement fan just have two wires at the termination, so I would need to buy the appropriate connector and terminals.