wont shift past 2nd gear

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

rhino

I'm Awesome
Joined
Nov 23, 2011
Messages
406
Reaction score
29
Location
flowood ms
The Solenoid apply chart is this....
1st gear, A and B solenoid is on.
2nd gear, A turns off, B stays on.
3rd gear, Both are off.
4th gear, A turns on, B turns off.

usually when a solenoid goes out, you lose either 1st and 3rd or 2nd and 4th. The main problem with these transmission's are the 3/4 clutches fail. That would be my bet if you have first and second gear only. Hope that helps.
 

silverado13

GEAR HEAD
Joined
Mar 4, 2011
Messages
1,081
Reaction score
49
Location
Baton Rouge Louisiana
if the clutches failed then youd be able to tell from burnt fluid and previous wear, if it went out all of the sudden my quess is go with the cheaper solution and look into electronics
 

heavychevy98

I'm Awesome
Joined
Apr 26, 2012
Messages
248
Reaction score
10
Location
Athens TN
I really dont know enough on this subject to comment but id like to help if i can. The tps went out on my car and would only go to second, might check the plug for something simple.
 

silverado13

GEAR HEAD
Joined
Mar 4, 2011
Messages
1,081
Reaction score
49
Location
Baton Rouge Louisiana
The Solenoid apply chart is this....
1st gear, A and B solenoid is on.
2nd gear, A turns off, B stays on.
3rd gear, Both are off.
4th gear, A turns on, B turns off.

usually when a solenoid goes out, you lose either 1st and 3rd or 2nd and 4th. The main problem with these transmission's are the 3/4 clutches fail. That would be my bet if you have first and second gear only. Hope that helps.
From what I've read. You have the 3rd gear and 4th gear backwards
 
Top