chevyz7195
Newbie
My driver side window doesn't roll up or down when pressing switch,it does have power goin it when l pressed on switch. Is the switch or bad or window motor bad? Its 95 k1500 z71
Last edited:
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It's a factory one I got from a 98 two yrs at junkyard.l don't hear anything at all when pressing on switch.l'll do that with vent and see.The gear teeth will strip out also, especially on cheapo replacements... but you should hear it turning if that is it. Make sure and get steel gears if replacing. Remove the vent at end of door and look inside with a flashlight.
You s/b able to swap the passenger and driver sides. See if the problem follows the switch.Is the switch or bad or window motor bad? Its 95 k1500 z71
That only works on the 88-94.. 95+ have different pinouts side to side and aren't individual switches.You s/b able to swap the passenger and driver sides. See if the problem follows the switch.
My 03 Blazer is exactly the same, both sides. I know mine is because of weak regulator motors. I disabled my auto-down feature because of it, had to take apart the motor in order to get the window to go back up after it stuck itself at the bottom of its travel on a particularly hot day.Does it work intermittently or not at all?
For some reason on my 1999 K1500 Suburban the front driver window doesn't work if it is rolled all the way up and it is hot.
If it is roll it down even the smallest amount or I let it cool off, it works again, no idea why.
Ooops my bad! Forgot about '95 being different - in about every way you can think ofThat only works on the 88-94.. 95+ have different pinouts side to side and aren't individual switches.
Not at all anymore you kinda hear it, not really at all.it doesn't roll at all when pressing switch up or downDoes it work intermittently or not at all?
For some reason on my 1999 K1500 Suburban the front driver window doesn't work if it is rolled all the way up and it is hot.
If it is roll it down even the smallest amount or I let it cool off, it works again, no idea why.