adb5274.ab
Newbie
- Joined
- Feb 6, 2014
- Messages
- 36
- Reaction score
- 0
94 tbi 5.7
been buildin this truck for a few months
replaced: plugs, wires, cap, rotor, pcv valve
full length headers, dual exhaust, cat delete
fuel pump and tank
cleaned all grounds
swapped auto out for 5 speed
now the truck pretty much wont start. will kinda try
to start when pumping gas alot and sometimes will
but misses bad and barely runs but cant get it started
at all now. traced all plug wires and they are landed in
the right spots. ohmed out coolant sensor and is correct,
replaced IAC valve. checked codes and only got 59, 67,
and 82 which are for the trans. checked vacuum lines
including MAP line.
not sure where to go from here, hopefully someone can
help!!!
been buildin this truck for a few months
replaced: plugs, wires, cap, rotor, pcv valve
full length headers, dual exhaust, cat delete
fuel pump and tank
cleaned all grounds
swapped auto out for 5 speed
now the truck pretty much wont start. will kinda try
to start when pumping gas alot and sometimes will
but misses bad and barely runs but cant get it started
at all now. traced all plug wires and they are landed in
the right spots. ohmed out coolant sensor and is correct,
replaced IAC valve. checked codes and only got 59, 67,
and 82 which are for the trans. checked vacuum lines
including MAP line.
not sure where to go from here, hopefully someone can
help!!!