FUNINMUD
OBS Enthusiast
Have found a dana 60 from a 90 f-350. Have been told they are less desireable due to width. I'd be running max of 38's.
For my 98 rc/lb.
Thx
For my 98 rc/lb.
Thx
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Correct, although it's arguably a moot point since the real weak link seems to be the stock 30 spline outers on either vintage.The 36.5" axle is actually a little stronger than some of the mid 70's dana 60's decause the inner shafts don't neck down close to the carrier. if i remember right.
That's not really the question that the OP was asking. He was asking whether it would be beneficial to find a 77.5-79 version for the narrower spring pad width of 32.5".dana 60's are great
plenty of em around too