shortchevy
I'm Awesome
- Joined
- Jan 17, 2011
- Messages
- 742
- Reaction score
- 114
I picked up a 2000 CCSB 2wd 2500hd a couple months ago and I figure I would share the "build". Here is what I started with
I put the bugshield on to hide a little surface rust on the front of the hood. I took off the step bars when one of the brackets rusted off and broke when I stepped on it. They were totally unnecessary since the truck is a stock 2wd.
The picture above shows the business end of this truck. I peeled the "Chevrolet" sticker off the tailgate and put on a black/red bowtie. you can still see the ghost because I havnt buffed it yet (its been a long cold winter lol) I plan on getting a bowtie off of a nnbs tailgate because this one is just too small.
This is what Im working with inside, Its pretty much a blank canvas. I did take the radio out and replace the backlights. The interior does need a good scrub down, I will take a weekend this spring and pull the interior out and clean it.
heres a picture of the front all I did up here so far was the bugshield and the black/red bowtie. I do want to replace my bumper with a chrome diesel bumper I think that would look sweet.
I did sell the cap this week but I havnt gotten a picture yet without.
Basically in this thread Im looking for some feedback but mostly Im looking for some ideas on what I can do to this truck to make it really b@d@$$. Im looking very closely at a spindle lift, I would like to hear from some of you guys who have them.
O and I got these yesterday
they need stripped and polished but for $150 with 4 good caps Im very happy.
You must be registered for see images attach
I put the bugshield on to hide a little surface rust on the front of the hood. I took off the step bars when one of the brackets rusted off and broke when I stepped on it. They were totally unnecessary since the truck is a stock 2wd.
You must be registered for see images attach
The picture above shows the business end of this truck. I peeled the "Chevrolet" sticker off the tailgate and put on a black/red bowtie. you can still see the ghost because I havnt buffed it yet (its been a long cold winter lol) I plan on getting a bowtie off of a nnbs tailgate because this one is just too small.
You must be registered for see images attach
You must be registered for see images attach
This is what Im working with inside, Its pretty much a blank canvas. I did take the radio out and replace the backlights. The interior does need a good scrub down, I will take a weekend this spring and pull the interior out and clean it.
You must be registered for see images attach
heres a picture of the front all I did up here so far was the bugshield and the black/red bowtie. I do want to replace my bumper with a chrome diesel bumper I think that would look sweet.
I did sell the cap this week but I havnt gotten a picture yet without.
Basically in this thread Im looking for some feedback but mostly Im looking for some ideas on what I can do to this truck to make it really b@d@$$. Im looking very closely at a spindle lift, I would like to hear from some of you guys who have them.
O and I got these yesterday
You must be registered for see images attach
they need stripped and polished but for $150 with 4 good caps Im very happy.