Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

strikk

I'm Awesome
Joined
Jan 19, 2012
Messages
390
Reaction score
586
Location
Mass
@Sean Buick 76 3.73's in the rear axle, 4.10's in the front dana 60. Once it's on the road I'll make the final decision on which to keep. It's probably going to be the 3.73's so i'm not screaming on the highway
 

strikk

I'm Awesome
Joined
Jan 19, 2012
Messages
390
Reaction score
586
Location
Mass
Front shock setup is complete, some details: OBS Ford shock towers welded to the WFO 88-98 Chevy frame plates with Bilstein 5100 series shocks and M14-2.0x80mm bolts. Bottom shock tabs are builder parts from RuffStuff. This gives me just over an inch of extension remaining at full droop.


Towers, Dorman part 523-054
Bilstein 5100 series 24-187374
Collapsed Length (IN) - 16.75
Extended Length (IN) - 26.73
Upper Mount Type - Eye 14.1mm
Lower Mount Type - Eye 14.1mm
4x M14x2.0 80mm metrics 10.9 hardware
 

Attachments

  • FD192EE7-4083-45FA-8093-E9879CD73D34_1_105_c.jpeg
    FD192EE7-4083-45FA-8093-E9879CD73D34_1_105_c.jpeg
    314.1 KB · Views: 13
  • 810D65E2-030D-4462-8807-14AAAB8EF49B_1_105_c.jpeg
    810D65E2-030D-4462-8807-14AAAB8EF49B_1_105_c.jpeg
    214.9 KB · Views: 14
Top