RHD dash etc, for Eric

[burkey05]

dash

You must be registered for see images attach

You must be registered for see images attach

HVAC
you can see in this pics how the a/c and heater hoses are on the other side of the firewall and upside down to how they would be normally.

You must be registered for see images attach

can just see the bottom of the blower motor on the passenger side(your drivers side)

You must be registered for see images attach

more to come.........

 

[great white]

Those seats and the wheel look good in there.

 

[burkey05]

RHD steering box on opposite frame rail. hard to tell from pic, but the frame has been modified to fit the box
from underneath

You must be registered for see images attach

looking down

You must be registered for see images attach

pitman arm

You must be registered for see images attach

idler arm and bracket

You must be registered for see images attach

You must be registered for see images attach

if you need anymore, just let me know

 

[burkey05]

Those seats and the wheel look good in there.

they're an old pic without the tach cluster i got from you

before

You must be registered for see images attach

after

You must be registered for see images attach

 

[eric.s.t]

Thanks man!!

 

[burkey05]

Thanks man!!

no problem.

like i said, im working on her later today, so if u need some more pics just let me know.

and there is a couple of places here in Aust. that i could get a RHD dash from, but it'd be expensive to purchase and expensive to send to canada.
as an example, I was after a 93+ tach cluster a couple of months ago. cheapest i could find here was $225AUD without the DRAC module. i got it off great white on this forum for alot less, even with the postage to here.

 

[great white]

they're an old pic without the tach cluster i got from you

before

You must be registered for see images attach

after

You must be registered for see images attach

nice to see it back in use again.

It's traveled quite a bit in it's life.

I got it in British Columbia and flew it back to Nova Scotia in my carry on luggage. Then we drove the truck back to British Columbia. The truck was scrapped and then it came to Newfoundland in a moving box.

Now it's in Australia.

Quite the world traveler!

 

[eric.s.t]

If you could let me know a rough estimate on the cost of shipping.. id be interested in knowing.the cost pf the dash too. If not, maybe if you could fjndbknr dissasamnled.

 

[burkey05]

nice to see it back in use again.

It's travelled quite a bit in it's life.

I got it in British columbia and flew it back to Nova Scotia in my carry on luggage. Then we drove the truck back to British columbia. The truck was scrapped and then it canme to Newfoundland in a moveing box.

Now it's in Australia.

Quite the world traveler!

sure has.

everything worked perfectly too. sold my original and broke out just shy of even

took me a couple of days to install and fine tune. big mess of wiring. ended up being 2x cluster connectors under my dash, so alot of the time was spent cleaning it up

both clusters connected at same time

You must be registered for see images attach

2nd cluster connector

You must be registered for see images attach

 

[burkey05]

If you could let me know a rough estimate on the cost of shipping.. id be interested in knowing.the cost pf the dash too. If not, maybe if you could fjndbknr dissasamnled.

prob easier if you email them yourself. you know exactly what you want.

here's two "wrecker"/suppliers that ive used b4

http://www.johdampet.com.au/yukon/
email
[email protected]
&
this one you'll have to email thru this website
http://www.gumtree.com.au/s-ad/munruben/truck-parts/chevrolet-and-ford-pick-up-truck-parts-selling-20-yr-collection/1035554536