Rear cab panel carpet

[95OBSMan]

Hopefully I'm in the right thread! Needing some advice on how to install the rear cab wall carpet... 1 owner truck unmolested until now, I'm replacing the carpet, removed all plastic trim pieces, resprayed them, fixed cracked dash board, now ready to install carpet, durning the removal of rear cab wall carpet there are no signs of attachment of carpet from the factory other than those plastic push in "buttons", does it just hang there? there's no signs of any type of adhesive applied to the back of carpet to the back of the cab wall from the factory, am I missing something when I tore out the old carpet? I could not find any thing on the web about this, of course a butt load of carpet installs, thanks for any help/suggestions here are some pics of the work I'm into.

 

[Drunkcanuk]

When I took mine out last year, I seem to remember it was too easy....lol. ya, I think it was just 2 push pin deals.

 

[xXxPARAGONxXx]

Just the push pins. I believe there are four, but don't quote me on that.

 

[95OBSMan]

Thanks for your reply's, there are 5 push pins for the back cab wall carpet and it just hangs there, the box for the jack and and the floor carpet help keep it in place. here's some photos of the interior pretty much done, I did a color change from the OEM med. beige/tan to the dark brown.

 

[HotWheelsBurban]

Thanks for your reply's, there are 5 push pins for the back cab wall carpet and it just hangs there, the box for the jack and and the floor carpet help keep it in place. here's some photos of the interior pretty much done, I did a color change from the OEM med. beige/tan to the dark brown.

That looks cool on a two tone truck!

 

[95OBSMan]

Thank you HotWheelsBurban!! I thought the combo color looks pretty cool as well. this will be my daily driver.