loudandproud
OBS Enthusiast
Tonight I started laying out the cage in CAD. I went out to the truck and started to take some measurements. It's the rough layout only right now. The main purpose was to see where the cage falls in relation to the cab mounts and the outriggers on the chassis.
I'm currently in a holding pattern until my frame rails are delivered.
I ordered then from Boling Bros in CA. They should be here in a week and a half. The rails will be very similar to the rails in their IG post below:
I'm currently in a holding pattern until my frame rails are delivered.
I ordered then from Boling Bros in CA. They should be here in a week and a half. The rails will be very similar to the rails in their IG post below:
You must be registered for see images attach
You must be registered for see images attach