CTX-SLPR
I'm Awesome
Howdy,
Chasing a problem with my power locks where they will blow the fuse instantly and intermittently trip a 30A thermal breaker. Keyless entry still works though not super reliably. I've pulled the door and kick panel off and have isolated the short to the body side of the power lock harness. Power (orange) is in continuity to ground, grey is in continuity to ground, but the other side of the lock circuit (tan) is not. There are no pinched wires in the door boot on the drivers side.
Since the keyless entry still works about all i can think of is a short in the dash harness or something upstream of diode isolation in the lock relay.
Thoughts?
Chasing a problem with my power locks where they will blow the fuse instantly and intermittently trip a 30A thermal breaker. Keyless entry still works though not super reliably. I've pulled the door and kick panel off and have isolated the short to the body side of the power lock harness. Power (orange) is in continuity to ground, grey is in continuity to ground, but the other side of the lock circuit (tan) is not. There are no pinched wires in the door boot on the drivers side.
Since the keyless entry still works about all i can think of is a short in the dash harness or something upstream of diode isolation in the lock relay.
Thoughts?