Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
Here is a picture of mine from last fall... the pine sap has since been cleaned off it. It's about to get a new fuel tank (already replaced the lines) and new rotors and pads up front. I'm trying to decide what to do engine wise... heads need rebuilding so I'm thinking Vortec or Summit Aluminum swap OR since as of May 1st 2016 all 1995 and older vehicles are inspection exempt I should go old school and build something with a carb and without modern emissions / computer control. I've flirted with the thoughts of a 454 + 4 speed