Supercharged111
Truly Awesome
- Joined
- Aug 20, 2015
- Messages
- 12,921
- Reaction score
- 15,936
Cool guys, but this is a GMT400 forum and they didn't get factory blocks.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
So the gmt800 lca fits the factory gmt400 lca mounting location? Does it keep the same track width? Do you know if the uppers are compatible?Yes, that is what i'm doing. Got spindles from a 06 gmt800(or lowered spindles). Lower control arm from a 2000 2500, you have to ream out the upper ball joint in the spindle to fit the stock upper control arm of the GMT 400 truck. The lower control arm will fit no mounting mods. Then you just have to run the GMT800 brakes. The GMT400 axles will work if you discard the thin metal ring that is closes to the spindle. Or use the GMT800 axles if you have them too.
So the gmt800 lca fits the factory gmt400 lca mounting location? Does it keep the same track width? Do you know if the uppers are compatible?
Could be a GMT800 also.A 2000 2500 is still a GMT400.
Yes that will fit a 4x4Quick question, for the back does it matter for the drop if its 2wd or 4wd?
Like will this fit a 4wd?
Ebay C-notch drop kit
ThanksYes that will fit a 4x4