Looking for Advice

[Charlie T]

Why does it look so white? Is it loaded with salt?

No it’s just mud on it in the pictures

 

[Charlie T]

Yes by a true professional.

Edit: that is if there is any clean metal under there. It’s iffy. Some will say yes others will say no.

I’ll wash it up and then show some more pictures

 

[Charlie T]

Couldn't disagree more. That is not some "I got a buddy with a welder" type fix. At least, it wouldn't be if it were me and my loved ones riding in it.

I definitely don’t wanna cut corners with it but I also can’t throw thousands of dollars at it at this time

 

[Hipster]

It can be fixed, but it needs to be cleaned up, assessed, welded properly, and reinforced with a diamond shaped backer plate. More to it than scabbing shyt together half-arsed. Not a job for 90amp flux core machine but shouldn't be thousands either.

 

[Hipster]

It is easy. Drill the ends, V the crack, lay in some beads, grind smooth, plate the inside. It'll be stronger than the rivets its all held together with.

Only the crossmembers are Huck bolted, the engine and longitudinal rails are technically one piece.

 

[Charlie T]

It can be fixed, but it needs to be cleaned up, assessed, welded properly, and reinforced with a diamond shaped backer plate. More to it than scabbing shyt together half-arsed. Not a job for 90amp flux core machine but shouldn't be thousands either.

Thank you for ur help!

 

[KansasOBS]

Not a job for 90amp flux core machine

You mean like this.

xc_hide_links_from_guests_guests_error_hide_media

 

[RacerM95]

c-Channel from behind then get it welded... If all else fails, Call the Guys at Art Morrison's and get your dream tube chassis !!!

 

[Hipster]

c-Channel from behind then get it welded... If all else fails, Call the Guys at Art Morrison's and get your dream tube chassis !!!

That would be umpteen thousands, lol....but badass.

 

[Charlie T]

You mean like this.

xc_hide_links_from_guests_guests_error_hide_media

Definitely not looking to do that lol