Welp im officially dumber than a box of hammers. Found out where my metal shavings came from...my drain pan was under my bench grinder catching metal,i didnt notice until i drained the oil in my step side lmao. So my f22a1 is GOOD TO GO! timing belt is gonna get finished this weekend,I just did the cam seal,dizzy seal,spark plug well gaskets,valve cover gaskets when it goes back on,and i got the crank seal for when i get to it. Robbing my f22b1 for the water pump as well,got a front main seal as well and a new timing belt cover. Got a few pics of her and the step side in the garage. Check out that valve cover lol i wanted something different and i definitely achieved just that,its the only one I've seen done up like a jaw breaker
Btw,step side is getting stripped down so i can swap the 4.3/350 turbo for the 5.7tbi/4L60E in the tahoe,along with the doors,fenders,hood,dash,and buckets. Gotta find a good rear end to throw under it too,sick of peg leg burnouts lol
Btw,step side is getting stripped down so i can swap the 4.3/350 turbo for the 5.7tbi/4L60E in the tahoe,along with the doors,fenders,hood,dash,and buckets. Gotta find a good rear end to throw under it too,sick of peg leg burnouts lol
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach