Interior LED conversion help

[96C1500]

I know the cluster takes 194 bulbs, but I'm not sure on the dome/map lights, the ones in the door switches, door lights, under the dash, and anywhere else I'm forgetting.
And which ones will require soldering instead of just a plug and play bulb

Sent from my Vortec powered HTC One M8

 

[96C1500]

I should add its a 96, so it has the newer style interior

Sent from my Vortec powered HTC One M8

 

[96C1500]

These should work in the cluster, right? http://www.amazon.com/gp/aw/d/B00LN0H0O0/ref=ox_sc_act_image_1?ie=UTF8&psc=1&smid=A1AV26721CPW7T
The only ones I'm for sure I have the right ones for are the dome and map lights, I managed to find those

Sent from my Vortec powered HTC One M8

 

[df2x4]

http://www.sylvania.com/en-us/applications/automotive-lighting-systems/Pages/lrgmain.aspx

Just check here. Should have all the bulb numbers you need and then some. This is how I got all the numbers for mine.

 

[96C1500]

Thanks for the link! Who knew it could be so confusing changing over to LEDs

Sent from my Vortec powered HTC One M8

 

[-sin-]

As DF2x4 said, that's the best link for info, you can also use Super Bright LEDs site and check out their products too

https://www.superbrightleds.com/cat/led-vehicle-replacement-bulbs/vehicle/----/----/

 

[someotherguy]

1995-up are 194's in the under dash and the door courtesy lights.

Map and dome are "festoon" - though the dome has barrel style ends, and the map are wire clip style. Pull it down and have a look.

I did these years and years ago before they had LED festoons that were direct fit for the map lights, so I soldered short wires to attach them. Still holding up 100% fine today.

You must be registered for see images attach

You must be registered for see images attach

Richard

 

[lester622]

I have a word document with all the led swap info for every light in the truck. If you want email me and I can send you a copy. [email protected]