I’m a DA…what maintenance have you screwed up?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

454cid

Sooper Pooper
Joined
Sep 5, 2010
Messages
8,316
Reaction score
9,562
Location
The 26th State
My rule is "never put hardware on unless you're going to torque it". I preach it to the race team as well.

I've never made that a hard and fast rule, but I basically do that... unless it's a matter of needing something a bit lose to fit a successive part in place. It's super annoying when I get something tightened up, only to realize I now can't fit something else.
 

GrimsterGMC

Supporting Member
Supporting Member
Joined
Nov 3, 2021
Messages
1,350
Reaction score
4,494
Location
New Zealand
Went through almost the the same thing last year with my GMC pickup, fortunately I hadn't set the bed back down so it was easy to rectify.
A few things came to mind after the truck was running again:
1. Can't fix stupid.
2. The aging process is real.
3. Making fun of yourself is good for the soul.
I have to agree with you on all 3 points. But #3 is the really important one when dealing with the first 2.
 

smdk2500

I'm Awesome
Joined
Dec 26, 2017
Messages
1,040
Reaction score
1,060
Location
Nebraska
Well I did this couple weeks ago and didn't notice till yesterday. Putting my 99 back together rebuilt the HVAC box put it back in put the dash back in. Went to hook the liquid line up on the evap and found that the nut on the evap that is supposed to screw into the liquid line is nowhere to be found. Im guessing when I put the evap in i didn't make sure that the fitting wasn't on the outside of the box. Now I have the joys of pulling the dash/heater box again to fix it. Good thing all I have installed in the dash is the dash itself not every thing else you have to take off to pull it.
 

MountainDont

Newbie
Joined
May 24, 2024
Messages
8
Reaction score
14
Location
The Valley of Don't
Once upon a time, I owned this front-wheel-drive foreign car. Ahh, I was young then. My boss's secretary was a real nice gal. It turned out that I was in the market for a car, and she was selling one. Let's call her Jenny.

Jenny told me that I needed to talk to her husband about it. Well, after work one day, he brings the car over and shows it to me. I like it. It has air conditioning, and it runs. Husband Steve tells me several non-consequential things about the car, and mentions something about a noise in the right rear. I take notice, but I really don't hear it when I drive.

So I bought this car. At the time, I lived about 4 blocks away from work, but driving was a lot safer than walking or biking simply because there was this huge freeway to go under. Well, I got in the car one morning on the way to work. It was uneventful. Maybe I heard something, but I don't really think I did. While still in the parking lot of my apartment complex, something unbelievably ridiculous happened to me. I had owned the car for less than a month.

This wasn't just any-old ridiculous event. This was hyperbolic, terrorist-level ridiculous.

And I was only going about 10 miles per hour when it happened. There were a few speed bumps in the parking lot, and I went over one or two.

Then, as I approached the exit to the apartment complex, I heard a loud THUD and a scraping sound on the right rear. Milliseconds later, I saw out of the corner of my right eye a dark object passing me and careening past my car. I screeched to a halt. I watched as the right rear wheel of my car, newly released from a frozen bearing, pass me at around 10 mph. It continued to roll to the parking lot exit, cross the street that I was going to turn onto, jump the far curb, and come to a stop at a vacant lot across the street, where it fell down. It was like a cartoon in real life.

Needless to say, I was a bit late to work that day.

Of course I had to call my boss ... whose phone was answered by Jenny ... to let her know that my car was disabled 4 blocks away and I was going to have to get a wrecker to move my 3-wheeled car into a parking space. All that was left on the ground was a nub (axle) and the inner part of a needle bearing. The hub and everything else had come off.

My coworker's husband Steve came to my rescue an hour or so later. He was very apologetic. He knew he should have looked at that wheel bearing. It had frozen so tight that "we" now needed a whole axle assembly from a junkyard in addition to the bearing, the wheel, brake lines, and other parts. Steve and I worked the following weekend or three, as he shuttled me around to part stores and junk yards to get everything. He was such a nice guy. He paid for essentially all of the repair parts, and did most of the labor, too. He felt 100% responsible for it.

I had never really worked on cars much before this mess. I guess I learned to pay attention to those little noises that might mean something. And I learned how to pack a bearing with grease! Oh, and I just realized that our Chevys ask for repacking the front bearings every 15,000 miles. I'm pretty sure mine has missed about 15 of those from the looks of the other things I see in this new-to-me rust bucket.

Be safe out there!
 

Keeper

Supporting Member
Supporting Member
Joined
Dec 6, 2020
Messages
673
Reaction score
1,618
Location
Northern Virginia
Once upon a time, I owned this front-wheel-drive foreign car. Ahh, I was young then. My boss's secretary was a real nice gal. It turned out that I was in the market for a car, and she was selling one. Let's call her Jenny.

Jenny told me that I needed to talk to her husband about it. Well, after work one day, he brings the car over and shows it to me. I like it. It has air conditioning, and it runs. Husband Steve tells me several non-consequential things about the car, and mentions something about a noise in the right rear. I take notice, but I really don't hear it when I drive.

So I bought this car. At the time, I lived about 4 blocks away from work, but driving was a lot safer than walking or biking simply because there was this huge freeway to go under. Well, I got in the car one morning on the way to work. It was uneventful. Maybe I heard something, but I don't really think I did. While still in the parking lot of my apartment complex, something unbelievably ridiculous happened to me. I had owned the car for less than a month.

This wasn't just any-old ridiculous event. This was hyperbolic, terrorist-level ridiculous.

And I was only going about 10 miles per hour when it happened. There were a few speed bumps in the parking lot, and I went over one or two.

Then, as I approached the exit to the apartment complex, I heard a loud THUD and a scraping sound on the right rear. Milliseconds later, I saw out of the corner of my right eye a dark object passing me and careening past my car. I screeched to a halt. I watched as the right rear wheel of my car, newly released from a frozen bearing, pass me at around 10 mph. It continued to roll to the parking lot exit, cross the street that I was going to turn onto, jump the far curb, and come to a stop at a vacant lot across the street, where it fell down. It was like a cartoon in real life.

Needless to say, I was a bit late to work that day.

Of course I had to call my boss ... whose phone was answered by Jenny ... to let her know that my car was disabled 4 blocks away and I was going to have to get a wrecker to move my 3-wheeled car into a parking space. All that was left on the ground was a nub (axle) and the inner part of a needle bearing. The hub and everything else had come off.

My coworker's husband Steve came to my rescue an hour or so later. He was very apologetic. He knew he should have looked at that wheel bearing. It had frozen so tight that "we" now needed a whole axle assembly from a junkyard in addition to the bearing, the wheel, brake lines, and other parts. Steve and I worked the following weekend or three, as he shuttled me around to part stores and junk yards to get everything. He was such a nice guy. He paid for essentially all of the repair parts, and did most of the labor, too. He felt 100% responsible for it.

I had never really worked on cars much before this mess. I guess I learned to pay attention to those little noises that might mean something. And I learned how to pack a bearing with grease! Oh, and I just realized that our Chevys ask for repacking the front bearings every 15,000 miles. I'm pretty sure mine has missed about 15 of those from the looks of the other things I see in this new-to-me rust bucket.

Be safe out there!
LOL... there's nothing quite like seeing a tire rolling by you on it's own, is there? I was a passenger when we moved over into the left turn lane and slowed down to wait for a gap in the traffic. Then I see something rolling thru the main intersection to my right. I laughed and just watched it as it missed all of the cars, hit a curb on the far side and launched straight up in the air and disappear into the woods beyond. Then I sneaked a peek in the sideview mirror to see where it came from. We only had one tire on the passenger side of the horse trailer. Thank goodness it was a double axle trailer.
 

Erik the Awful

Supporting Member
Supporting Member
Joined
Aug 9, 2019
Messages
8,258
Reaction score
17,252
Location
Choctaw, OK
LOL... there's nothing quite like seeing a tire rolling by you on it's own, is there?
When all the stars align, my race team can stream video and car data from the car while it's on track with about a ten second delay. When we have it working, we broadcast on Twitch. We went to Sebring a couple years ago, and when the race started we were following the action on the monitor. We got busy doing paddock chores and chit-chatting and then we noticed the monitor was black. My mom texted me from here in Oklahoma and asked, "Was that your wheel passing the car?"

Long story short, the rear wheel studs sheared (they'd been on for a few years and loosened themselves up - it's on our checklist now) and after the driver got the car off the track he shut off the car's power, killing the video feed.
 

Moofus02

I'm Awesome
Joined
Sep 21, 2021
Messages
288
Reaction score
421
Location
Michigan
My latest DA trick was doing brake lines on my 94 roadmaster. Thought I was done but couldn't get the back to bleed. Lf wheel was wet. Rear line was shooting against front wheel. I snaked a new line to where someone spliced it under the front floor. She there bubble flare at the front. I cut and flared the front pulled out apart under the car and blew air through it to get the shavings etc out of the line. Home it up at the anti lock box and started bleeding. Yep didn't put it back together under the car.

Another I was running wrecker went to get a junk car with no motor or trans in it and take it to scrap yard. It was nosed into garage so I slung it from the back. Can't hurt a junk fwd car. It was 3 miles through town to the yard. I forgot the axle shaft holds the front wheel bearing together. Half way there the rf wheel and bearing exit roll through intersection hits curb jumps up in the air a foot over the head of a young girl standing there. She dropped her school bag and had the tire captured and rolling it back to me by the time I get stopped. I thank her toss it in the car and boogie to the yard dragging it on the a arm. Thank God she didn't get hurt. She thought it was funny. Good saved me that day
 

89GMCJOHN

I'm Awesome
Joined
Jun 16, 2017
Messages
463
Reaction score
553
Location
Clermont Fl
I rebuilt and put together a Buick 455 in my parents garage patio when I was 18. I had newspaper all over the concrete because I wanted to be respectful of their space - no oil drips etc. etc . When I got done putting it together with all new gaskets , Indian tar sealer on the front cover etc . I sat back and took a look at my completed work and I said to myself that was too easy something must be wrong. So I started picking up the newspapers off the ground and I hear CLINK.....my heart sank I had left the oil slinger off the crankshaft . It all had to come apart again to get it in there ....AAARRRRGGGGGHHHHH and some other choice words.
 
Last edited:
Top