Solid94
Chevy Ridin' High
I agree with the green tape. The blue sometimes bleeds under
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It's looking good!I started by taking the side strips off my truck
and then i masked with 3m green and blue tape and cleaned it off and began sanding with 80 grit sandpaper
then after i was finished sanding i cleaned it with a hose let dry, then wiped it with MEK for prep and then went over it with a tack cloth and began applying my first light coat
you can tell by this picture that it is a very light coat
i then waited an hour and a half roughly and began applying my 2nd coat which looks like this
and i am now waiting to apply my third coat lets hope i can get done before sundown! finished pics will be posted when i get them! probably tomorrow