Kyle97GMC
NO SIR IT'S NOT A CHEVY.
I would use your design along with the strobe lights from squeaky3's truck
I am actually thinking about throwing some lights on it but that will be down the road haha
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I would use your design along with the strobe lights from squeaky3's truck
Heres mine
You must be registered for see images attach
You must be registered for see images attach
Any way you could find the dimensions on this taylor?
Yah what do you need? I can measure it this weekend its just sitting in my yard lol
sent from my outdated S3
Shrader is building me one this week and we need the angles, the width and the height, but if you can't get to it this week thats's fine we'll try to figure it out haha
You must be registered for see images attach
You must be registered for see images attach
#1 70 inches
#2 55 Inches
#3 21 inches
#4 55 Inches
I also measured from back of roof to middle of door which came out to 40 inches. I chose this placement for the Carr low profile light bar that i may wind up adding in front of the roof rack for the front to attach to. Unless it will be strong enough to free stand over top of the cab without it touching it. Im guessing if 2-3 inches are added to the height for #3 it may have enough clearance to account for cab movement when the truck is flexed on the trail
Since i wasnt quite sure what you wanted for #1 i also measured from box rail to box rail and got 63 inches on that measurement.
This may help: