Having problems with my HIDs (only one igniting)

[AbramF_496]

Throw a relay kit in it... Problem solved.

exactly!!! im running quad beam 55 watt hids 4300k the quad beam is the relay for my brights and i have a relay run on my 9006's done.... come on now

 

[low4x4]

i am also having a one on.... problem...but differant....i have mean green's, 3 relay harness. and 35w4300klows and 55w4300k highs.......turn on low, both light....turn on hi and the one lowbeam nearest the battery goes out...cycle the light switch and all four work...happens everytime...both neg and pos go directly to the battery...any ideas?

 

[low4x4]

anyone???

 

[Mean Green]

anyone???

Sounds like the passenger side low beam ballast is failing to me! An easy way to test this, is too swap the ballasts left to right. And then see if the problem follows. I've seen a lot of times where when the ballast or bulb is failing, they will ignite initially, but they will go out if they don't have power for a fraction of a second. If you need any help, you can give me a call anytime and ill be happy to help you figure out the problem with the ballast!

 

[low4x4]

thanks ..i will try swapping stuff out to isolate the problem