Guys need some remote start wiring help

[Eskimomann209]

On your ten pin harness you didn’t hook up your 12V constant supply(s)

 

[FIREBALL 94]

On your ten pin harness you didn’t hook up your 12V constant supply(s)

Thanks for the reply yeah I was looking over it again last night when I got in from work, maybe I’ll get a chance to work on it sometime this weekend I hope

 

[Eskimomann209]

1 NC No Connection

NOT USED


2 RED / BLACK (+) FUSED 12V ACCESSORY/STARTER INPUT;

Constant 12 V


3 PINK/BLACK 2nd IGNITION/ ACCY ISOLATION WIRE


NOT USED


4 PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT;

This is for the Ignition 2 wire WHITE


5 RED (+) FUSED 12V IGNITION 1 INPUT;

CONSTANT 12V


6 GREEN (+) STARTER INPUT (KEY SIDE OF THE STARTER KILL);

KEY SIDE OF YELLOW STARTER AT COLUMN



7 VIOLET (+) STARTER OUTPUT (CAR SIDE OF THE STARTER KILL);

FOR THIS IM THINKING OF USING THIS WITH A RELAY TO GET IT TO START

Pin 85 - Ground

Pin 86 - Starter from alarm (violet)

Pin 30 - Starter 2 on car

Pin 87 - +12V constant - FUSED 20A
Or you ca plug into the other side without a relay I like to bring in more power personally to turn the truck over



8 ORANGE (+) ACCESSORY OUTPUT;

ORANGE ACCY WIRE


9 RED / WHITE (+) FUSED 12V IGNITION 2 / FLEX RELAY INPUT 87;

CONSTANT 12V

10 PINK (+) IGNITION 1 INPUT/OUTPUT ;

CONNECT TO PINK WIRE AT COLUMN

 

[FIREBALL 94]

1 NC No Connection

NOT USED


2 RED / BLACK (+) FUSED 12V ACCESSORY/STARTER INPUT;

Constant 12 V


3 PINK/BLACK 2nd IGNITION/ ACCY ISOLATION WIRE


NOT USED


4 PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT;

This is for the Ignition 2 wire WHITE


5 RED (+) FUSED 12V IGNITION 1 INPUT;

CONSTANT 12V


6 GREEN (+) STARTER INPUT (KEY SIDE OF THE STARTER KILL);

KEY SIDE OF YELLOW STARTER AT COLUMN



7 VIOLET (+) STARTER OUTPUT (CAR SIDE OF THE STARTER KILL);

FOR THIS IM THINKING OF USING THIS WITH A RELAY TO GET IT TO START

Pin 85 - Ground

Pin 86 - Starter from alarm (violet)

Pin 30 - Starter 2 on car

Pin 87 - +12V constant - FUSED 20A
Or you ca plug into the other side without a relay I like to bring in more power personally to turn the truck over



8 ORANGE (+) ACCESSORY OUTPUT;

ORANGE ACCY WIRE


9 RED / WHITE (+) FUSED 12V IGNITION 2 / FLEX RELAY INPUT 87;

CONSTANT 12V

10 PINK (+) IGNITION 1 INPUT/OUTPUT ;

CONNECT TO PINK WIRE AT COLUMN

Hey thanks for the info above now if I could just get time to work on it ....lol

 

[GMCTRUCKS]

I wish you good luck buddy

 

[Rob Green]

Well.....? LOL!!

 

[FIREBALL 94]

Well Guys I had to put everything on hold work has swamped me and then I had to do work my new house and been working on my wife’s other car her new beetle so I’ve been busy busy busy ... thanks for the above info and I’ll let u know soon as you must back to it cause I would like to get it finished soon...!