Monty@taylormadetarp
Newbie
- Joined
- Dec 27, 2013
- Messages
- 7
- Reaction score
- 0
I seen that before .The oil for oil burners ....I checked the codes again after a small ride , po327, po300 thanks in advance for all the replies and advise.. Monty
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
thanks again for the help My reader shows the two codes. was thinking back a few weeks ago it was very slow to respond on take off. Just looked and seen someone has broke the bolts off the cap and the distributor is loose..could be the whole problem i guess.. need to find one i guess. sorry for posting all in one thread maybe i should start a new one
Good Afternoon. Thanks Again. I Found Out My Front Cat Is Plugged. Second Cat Is Empty. Looked Around On Cl Last Night. CLMember has a full exhaust Off 1998 ex Cab Mine Is Crew cab, but I got from Motor back complete for $50 Bucks. Both cats are clean and full. has ALL senzors with it. Mine has had the flange between the convertors welded so im going swap the convertors out and weld my 2 into 2 flowmaster back on them.. As For the distributor both the cap bolts are broke off. Any one Knoe Of a fix for this ? THE Owner Before Had IT Zip tied on . no wonder all the problems