Door Roller Spring Catch Arm

[Cunningham Machine]

We have remade some of these door arms thats rides against the roller. We found out with our very first R&D roller that if the arm is damaged it won't stop the popping. These come with a bushing and hardware to bolt them on. The hardest part of the job will be removing the factory one.

88-98 Door Roller Spring Catch Arm

Aftermarket truck parts

cunninghammachine.com

 

[Orpedcrow]

This is awesome. The one I made was not the best solution. I’ll be ordering a set of these at some point.

 

[South VA]

I just discovered yesterday that what I thought was a simple missing door spring was in fact the driver's side roller pin had snapped off. The arm is still there, but I'm not sure if it needs replacement or not.

You must be registered for see images attach

Anyway, I went to your site and found a new roller pin, which is a huge relief. Thought I was going to have to replace the whole hinge.

Thanks for saving me a bunch of time, aggravation, and money!

 

[twt63]

We have remade some of these door arms thats rides against the roller. We found out with our very first R&D roller that if the arm is damaged it won't stop the popping. These come with a bushing and hardware to bolt them on. The hardest part of the job will be removing the factory one.

88-98 Door Roller Spring Catch Arm

Aftermarket truck parts

cunninghammachine.com

Do these have to be painted?