Bolts

[GoToGuy]

If your doing your own repairs , a thread gauge and calipers are or should be your basic knowledge. It's not difficult.

 

[93chevyluvr]

I have a box full of spare washers and tons of extra bolts

 

[Supercharged111]

I used those Dorman bolts…

How do you sleep at night?

 

[Caman96]

How do you sleep at night?

It’s been rough.

 

[pgutier1]

You can use digital calipers and a thread pitch gauge to find the size of any bolt.

I swear by these, thread checkers are a life saver!

 

[pgutier1]

92 k 1500 6 lug 350 5 speed 3 bolts hold hub on seen 15 mm didn't know size threads or if anybody knew where get any cheaper than $ 38 kinda high for 3 bolts

If you ask nicely, I can get some from a local PNP that are not rusted since you are in Virginia. Just pay for shipping...

 

[tommy loyal]

GM Part no. 15995614. $7 each when Obummer was still President. $16/each on Amazon.

Amazon says Dorman 917-507 should work, pack of three, $24.
www.amazon.com/Dorman-917-507-Bearing-Mounting-Bolts/dp/B01ID3P76C/ref=sr_1_1?crid=45Z2U1ZTTTO5

xc_hide_links_from_guests_guests_error_hide_media

They are NOT "15mm bolts". They have a 15mm hex head.

If you use anti-seize or any other thread lube, reduce the torque by 10--20 percent.

Thanks found them