mackguy
I'm Awesome
Ok, so last week I noticed the blend door (to direct air to floor/dash/defrost etc) wasn't working right. I suspected the actuator since it is almost 20 years old, but upon diving under the dash and checking it found the actuator to be working fine.
Problem is the levers that it actuates are all wonky. it seems like there's a rod that should go all the way through, and it's as if it has come detached from the side opposite the actuating lever and now the blend door is just floating around in there somewhere..
So my question is does anyone have a diagram showing the mechanism, and/or have an idea of how to disassemble it to see what's going on?
Problem is the levers that it actuates are all wonky. it seems like there's a rod that should go all the way through, and it's as if it has come detached from the side opposite the actuating lever and now the blend door is just floating around in there somewhere..
So my question is does anyone have a diagram showing the mechanism, and/or have an idea of how to disassemble it to see what's going on?