BluC10
Newbie
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
So its is kind of hard to tell from the pictures, but this is my 96 I just did a 3/4 drop on (this is just the rear dropped in pics) before I lowered it the rear right always sagged a noticeable amount and I was hoping after doing the new hangars and shackles somehow it would magically go away....that didn't happen.
Front of the truck is dropped now as well and it still sags in the right rear. In the first picture you can kind of tell where it's coming from. The bed up by the cab has an even gap the whole way across but the farther back you go the lower the bed gets. I have took the truck to the spring shop and everything measured out and looked perfectly straight. Brand new bell tech shocks as well. When we took the bed off to do the drop it all looked good and couldn't see anything noticeably wrong. Anyone have any ideas at all?!?!?! Can beds "warp" to cause this?? The tailgate-bumper gap is the same all the way across if that helps. I'm so lost and I don't want to finish building this motor If something is seriously wrong with the truck.