I have a unique situation, my 1998 K1500 Suburban is equipped with Baer brakes, rotors and calipers. The spindle in the front hub is 12 mm smaller than stock. So the bearing in one is going. I have a new Timken hub ready to go in but have to pull the spindle out of the old one and put it into the new hub assembly. When we pressed out the original spindle the bearings in the hub were damaged, maybe because they already were? We are afraid to press the spindle from the new hub assembly out and risk messing up the new bearings. So, I was wondering, does anyone have the bearing numbers that are in the hub assembly. We could not find any in the old hub assembly.