gulleyman
Newbie
- Joined
- Sep 28, 2010
- Messages
- 20
- Reaction score
- 3
Hey folks, I have an '02 2500hd Crew 4x4 with an Autopage RS 1000 remote start 2way paging alarm.
I had to move the module over a foot to squeeze a few other things under the dash. I noticed that some of the wires were just twisted together and taped so I soldered them and used heat shrink tubing.
Now everything seems to be working except the remote start, it tries to start but stalls right away two or three times then the transponder says the truck is running... but it's not.
I think I may not have hooked something back up. Maybe there's some sort of programming that has to be done again or my bypass module isn't working or something. Can anyone help me sort this out?
I had to move the module over a foot to squeeze a few other things under the dash. I noticed that some of the wires were just twisted together and taped so I soldered them and used heat shrink tubing.
Now everything seems to be working except the remote start, it tries to start but stalls right away two or three times then the transponder says the truck is running... but it's not.
I think I may not have hooked something back up. Maybe there's some sort of programming that has to be done again or my bypass module isn't working or something. Can anyone help me sort this out?