1995 GMC RCSB is the truck. Needing a photo of the antenna lead that runs from the back of the OEM deck out to the inner fender well where it connects to the lead that is going to the mast mount on the fender. The photo I'm looking for is the end of the lead thats comes from the radio. When I bought the truck in June of this year I didn't check the radio for operation, when I did, it works fine except for bad signal strength, which lead me to checking the antenna leads and finding that the 2 ends (located at the inner fender well) where not connected, tried pushing them together but with no luck!? Both ends are of the same diameter!? What am I missing!? This is kinda screwy, hence the need for a pic of the end of that lead that runs from the radio to the connection point in the engine bay, I believe that the lead from the mast (fender mount) is correct, as the rubber boot is in tack and not hard or anything like that, it seems like the other lead is missing something, it is not cut or frayed, it seems oem, but the 2 will not go together! Any info would be greatly appreciated!