Dannyboy97
Newbie
Recently acquired '97 Tahoe 2dr with a 5.7. When I got the truck, CEL was on, pulled codes p0102, p0340, and p0441. Had the distributor changed and the light cleared, came back on after about 20min worth of driving with the same codes. Started doing a bit more research and found out my eng 1 fuse was blown, changed it and reset the codes once again. Truck seems to be idling and driving a lot better now and the CEL has not come back on after about 2 days of driving. The only issue I'm running into now is in the morning, truck will start right up, idle for a second or two, then stall out. Start it again, rpms jump around and eventually levels out and drives fine the remainder of the day. Any insight would be appreciated.