Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Timcook8

Newbie
Joined
May 22, 2024
Messages
10
Reaction score
14
Location
Nampa Idaho
The top mount bushing,will be a custom offset poly bushing,i will see if i can get a few made if anyone else want's to do this swap

Driver's lower mount will be drilling a hole in center,completely removing the stock mount.then making a stock bracket (unless someone has oem part #) to have it bolt in. (pic for reference)




driveshaft info,if you have this driveshaft it will work without mods,take the clip that holds it off,take off the endcap now you can get move it around enough and use a pry bar to get it in,then put the cap and clip back on
I have questions.....Nice ride, sounds like the setup that I am building.
 

Attachments

  • 256737143_400664641848739_5267650127292088607_n.jpg
    256737143_400664641848739_5267650127292088607_n.jpg
    365.6 KB · Views: 3
Top