Hey OBS brothers and sisters. Long time reader, just recently signed up. I bought some 4.5" lift spindles for my '95 c2500 from spindle-source on Ebay. I just have a few questions for the people who are running them.
1. Do they push the front out, do i need to run spacers on the back to even out the track width?
2. Do i need extended brake lines? If so, can you help me out with a part #. Do i need them for front and back?
3. Im going with the 3" block in the back. That will give me a 1" rake. What shocks are ya'll running?
Any help would be greatly appreciated. Im putting all the parts together and putting everything on the week of July 17th.
Here is how it sits now.
Thanks, Keith
1. Do they push the front out, do i need to run spacers on the back to even out the track width?
2. Do i need extended brake lines? If so, can you help me out with a part #. Do i need them for front and back?
3. Im going with the 3" block in the back. That will give me a 1" rake. What shocks are ya'll running?
Any help would be greatly appreciated. Im putting all the parts together and putting everything on the week of July 17th.
Here is how it sits now.
You must be registered for see images attach
Thanks, Keith