fuel system

  1. Angelo

    Using PTFE tape or Teflon tape on metal fuel line fittings?

    I can't find a M16X1.5 Male or female to barb that come with an "o ring seal", other than female pair at Leroy Diesel which is $28 after shipping. I need one female and one male. This is to be used behind fuel filter only (at LP) on a 6.5l K3500. Could these tapes be used as a substitute? The...
  2. F

    Eating fuel pumps

    I posted in the towing section because that is the main duty of the truck. 1997 K3500 7.4l 4l80e stock except Five O Motorsports injectors and Gibson short header and flowmaster 50 series I keep burning fuel pumps. 500 to 1000 miles (roughly). I bought the truck with a hole in the bed for...
  3. A

    Abundant Fuel Pressure

    Happy new year to you all! I've concluded that my engine is getting 'flooded' with gasoline. There used to an MSD ignition system installed that created a more powerful spark. This has been disconnected, I'd like to keep it this way in order to pass inspection. However the old modified fuel line...
  4. E

    LS swap fuel system on K1500 stock fuel system

    Any thoughts on how I should run fuel lines and what not for a ls swap in my 97 k1500. I did just buy a new tank and pump last year and definitely wouldn’t wanna swap it with that expensive plastic sob that came on the Silverado. Any thoughts on how I can do this?
  5. Stretchmatthew

    Fuel related issue, please chime in

    Driving home the other day in my 98 k1500 pu 5.7l when she just died. Had an p0122code on scan. I adressed that but as i believed there was a fuel issue. I have a no start situation now. Seems my fuel pump is running, i can hear it dumping in the tank, but no pressure on the schrader valve. Is...
Top