cunningham machine

  1. K

    Play in New Steering Gear Box After Cunningham Machine Steering Shaft

    I just installed a CM lower steering shaft. It's amazing. Build quality is top notch. While I was in there, I replaced my leaking steering gear with a Blue Top unit. After getting it all back together, I noticed a 1/4 of "dead play" in my steering wheel. Feels like a gap between the gears in...
    • kephas
    • Thread
    • blue top bluetop cunningham machine cunninghammachine lower steering shaft steering box steering gear steering shaft
    • Replies: 17
    • Forum: General GMT400 Discussions
  2. Cunningham Machine

    95-00 Billet Glove Box Button

    Introducing our new billet glove box button with your old school ball mill lines. Super easy installation. Offered in black anodized or raw machine finish. https://cunninghammachine.com/1996-2000-gm-obs-billet-glove-box-button/
  3. Misterman

    Cunningham Machine lower install

    Well about a month ago I finally got an extra set of hands to wiggle the steering wheel while I looked with a flashlight. I could see excessive play in the less than a year old lares 205 rag joint. So I ordered the CM lower steering shaft. First impressions: YES. Built well. Thought out...
  4. Cunningham Machine

    1973-1994 C10/OBS Billet Shifter Handle

    Ready to bring your interior to the next level? Look no further than these beautiful billet aluminum shifter handles! Designed to match our tilt knob in the earlier year trucks. Sleek and very slim design so its not an overall bulky shifter. Direct fit for 73-94 or the 95-00 GM Trucks. Select...
  5. Cunningham Machine

    1988-1994 GM Truck Headlight Switch Saver

    Our 3D printed Headlight saver is designed to epoxy to the back of the bezel and save the switch. No trimming of the factory broken nubs needed in this design. The piece to epoxy on has a small groove in it to show the area to apply to epoxy to. It would be best to assemble the unit as pictured...
  6. Cunningham Machine

    95-00 Billet Shifter Handle

    Ready to bring your interior to the next level? Look no further than these beautiful billet aluminum shifter handles! Designed to match our tilt knob in the earlier year trucks. Sleek and very slim design so its not an overall bulky shifter. Direct fit for 73-94 or the 95-00 GM Trucks. Select...
  7. Cunningham Machine

    Tailgate Saver Shock (Strut) – 88-98 GMC Chevy Truck

    We have partnered with our friends over at LS Fabrication to bring these awesome tail gate savers state side to save our customers a little shipping cost! LS Fabrication's "Gate Saver" or Tailgate Assist Shock/Strut – 1988-1998 Chevy Truck adds eye catching customization to your OBS Chevy...
  8. Cunningham Machine

    GM Billet Hazard Light Knob

    Tired of your plastic factory hazard knob? Look no further than our Billet Hazard Knob. Super easy installation. Designed the match the shifter knob and tilt wheel lever for a nice well-rounded interior. Offered in Raw, Black Anodized, or Polished versions. These fit a ton of old GM vehicles in...
  9. Cunningham Machine

    BLACK FRIDAY 2025!!

    Its here. Its finally here!! 10% Off site wide now through December 1st. Should automatically apply, but if you have issues reach out!!
  10. Cunningham Machine

    88-98 GM Truck 3rd Door Bushings And Pins

    Tired of having to slam your barn doors? Sick of the doors sagging and dragging? We have the fix for you! Introducing our heavy duty bronze 3rd door bushings and pins. These are machined from an very high quality self lubricating bronze with a stainless steel pin. Sold in kits with pins. Parts...
  11. Cunningham Machine

    88-00 Chevrolet/GMC Rear Barn Door Bushings

    Tired of having to slam your barn doors? Sick of the doors sagging and dragging? We have the fix for you! Introducing our heavy duty bronze rear barn door bushings and pins. These are machined from an very high quality self lubricating bronze with a stainless steel pin. We HIGHLY recommend that...
  12. Cunningham Machine

    Billet Stake Pocket Covers

    Want to cover up those ugly bed holes, but do not want to have to weld them up and repaint? No worries! These super simple billet stake pocket covers have you covered! Designed to be put in the stake hole and twisted 90 degrees and then tightened up with the supplied bolts to cover the hole. The...
  13. Cunningham Machine

    Billet 4WD Actuator

    Little something we decided to produce ourselves and offer to the OBS crowd for those pesky electronic 4wd actuators. Replace that pesky eletronic 4wd actuator with this bolt in billet replacement. This will keep you a quick lever pull away from having 4wd without worrying if the actuator is...
  14. Cunningham Machine

    Billet Tailgate Supports

    Sorry I don't get on here and post as much as i can. Sometimes its a struggle keeping up with all the forums, facebooks, and what not! But hey heres a cool new product we launched last week!!! Sick of those rattling, rusty, and bent up factory tail gate supports? Grab one of these bolt on ready...
  15. Cunningham Machine

    88-94 Billet Interior Door Hande

    Hey GMT400 Forum. Sorry we have been absent and don't post a lot. We stay fairly busy with a small crew so hard to keep up with all the posting and social media stuff. Little something new we dropped here recenty you all may like. Billet interior door handles for the 88-94 trucks. We all know...
  16. Cunningham Machine

    Door Handle Teaser

    I don't hardly post here enough simply because I am busy trying to keep everything rolling smoothly, but we do have a little teaser we are trying to redo. We know these handles are a failing point and are trying to get something in the works to redo them. Not as common as the 95 and up handles...
  17. Cunningham Machine

    92-00 Suburban Roof Rack Delete Plates

    For those guys of you wanting to remove the roof rack and have a decent way to cover the holes with a bolt on solution. We now have them ready for suburbans too with the 8 post rack mounts. Available in black or raw aluminum. https://cunninghammachine.com/92-00-suburban-roof-rack-delete-plates/
  18. Cunningham Machine

    Axle / Brake Redrill Fixture for 5x5 Trucks

    Something new we are offering is a redrill fixture specifically for 5x5 trucks. Now we fully understand this isn't for everyone. If you don't feel comfortable doing something like this then its not for you. We are also aware others sell similar products. We are just trying to give what our...
  19. Cunningham Machine

    14 Bolt 6 Lug SF Disc Brake Adapters

    These disc brake brackets are for the 14 bolt with 6 lug SF. The way our setup works is we send you out the brackets (and hardware if you opt for it) and a parts list. Everything on our parts list is all super easy stuff to get from a local parts house or rockauto (rockauto always having the 5%...
  20. Cunningham Machine

    10 Bolt Disc Brake Adapter for 11" Drum

    These disc brake brackets for the 10 bolt with 11" Drums. The way our setup works is we send you out the brackets (and hardware if you opt for it) and a parts list. Everything on our parts list is all super easy stuff to get from a local parts house or rockauto (rockauto always having the 5%...
  21. Cunningham Machine

    10 Bolt Disc Brake Adapter for 10" Drum

    Probably one of our more popular setups is the brake disc brake brackets for the 10 bolt with 10" Drums. The way our setup works is we send you out the brackets (and hardware if you opt for it) and a parts list. Everything on our parts list is all super easy stuff to get from a local parts house...
  22. Cunningham Machine

    14 Bolt NBS Brake Spacer

    A fairly popular upgrade to the 14 Bolt 6 lug SF rear ends is to swap to NBS brakes. So like taking the setup from a 2003 Tahoe or similar with factory rear brakes. These spacers make up the difference in the space needed to bolt them on and get everything to line up. One thing to note with...
  23. Cunningham Machine

    Heavy Duty Tie Rod Sleeves

    Made from a 1 inch hex steel these things are beefy. Paired with a set of Mevotech TTX tie rods they are about one of the strongest bolt on options. Our sleeves fit factory tie rods perfectly fine as well. If yours are having an issue with your factory split ones coming loose or adjusting when...
  24. Cunningham Machine

    Rag Joint Delete Steering Shafts

    With most of these trucks getting some miles on them the wandering steering becomes a real issue. We are fully aware of all the options on the market that can help this, but I am here to show you ours. It is a complete bolt in ZERO modifications needed install. It takes longer to find the right...
  25. Cunningham Machine

    DISCOUNT CODE!!!!!!!!

    Everyone loves discounts. We are a new vendor here and would like to extend a small offer out the the GMT400.com crew for allowing us to join! Use coupon code GMT400 for a 5% off ANY PRODUCT. Good until NEXT FRIDAY!!!!!

Latest posts

Members online

Total: 2,959 (members: 39, guests: 2,920)

Forum statistics

Threads
77,831
Messages
1,640,630
Members
80,531
Latest member
kugs13
Top