Search results

  1. 99kon

    1996 SCSB LS Swap

    So here we go again! I did a swap on my 99 2 dr tahoe and wanted to do a single cab. This will serve as a daily driver so nothing radical with it. Just a reliable truck with good MPG. I drive 80ish miles a day round trip to work so my new truck has been accumulating miles faster than i would...
  2. 99kon

    WTB Spider injetors

    Looking to see what's out there before i order. Im in Houston text me 832-465-8623
  3. 99kon

    1999 2 dr 2 wd tahoe shock extenders

    I know the extenders are to correct the angle of the shock and will still need a drop shock. But I cannot get a consistent answer. I call DJM and they say to use part #SE1128 Belltech says to use the ones for trucks part #6652 Which is it?? Why does DJM have a specific part # and...
  4. 99kon

    My LS swap in 2 dr 2 wd tahoe

    I'm looking at the end of this month to do my swap My truck has 248,000 miles on it and still runs good, I believe the motor was rebuilt though. This truck is basically a new truck. Every part of the suspension is new, everything other than the steering box on the steering linkage is new. Rear...
  5. 99kon

    2 door 2 wheel drive Tahoe

    Picked her up Saturday Has 2/3.5 Belltech drop Rear rides hard very stiff. I think it has stock shocks. Front has 2" Belltech spindles and shocks. I dont know why they used new stock shocks for the back. Wheels are AR Torque Thrust 2 18x8 front 18x9 rear 235/50 up front and 255/55 rear Im...
  6. 99kon

    Back in a 2 door 2 wheel drive Tahoe!!

    Technically its not mine yet because I pick it up Saturday. I'm in Houston and the truck is in Grand Prarie TX. But the deal is done and i just have to pick it up. Been looking for a while and this one was on my radar for about 2 weeks, but the price was a little higher than what i wanted to...
  7. 99kon

    Looking for a single cab

    I have the following for trade if anybody is interested Kimber Custom Target 2 AR-15 Glock 42 Walther P22 ATI Pump 18" barrel "tactical" shotgun I can do any combination of those guns to trade for a running driving single cab truck Need a daily driver my crew cab is killing me on gas...
  8. 99kon

    Do I need head gaskets??

    1998 Silverado 5.7L Noticed that when I turn the truck off my overflow tank fills up. Then I check level in radiator and I need to add water but it gets to a point where it blows the top cap off and coolant hoes everywhere. Am I right by thinking it needs head gaskets? Oil is nice and clean...
  9. 99kon

    Building a 400 Small block

    Friend of mine asked me to put together a 400 for him. He has double hump heads that he wants on there. Motor will be stock with a .30 over bore making it a 406 He has a 750 cfm carb but i think its to big of a carb for the set up. What you guys think? Also what intake to use? Victor jr...
  10. 99kon

    Drop spindle question

    I bought a set of drop spindles for my 1990 single cab Will they work on an 1998 extended cab? I want to say i heard some where that they are different or something. I know i used a different rotor or something like that. Its been so long! Im going away from my single cab to an extended cab.
  11. 99kon

    400 SBC in my 1990 scsb

    Intentions when I found this truck was to put a 6.0 ls engine. After a lot of going back and fourth with myself I decided to go back to what I had back in 1997. A 1990 scsb with a 406. So today I started looking and found a virgin 400 sbc long block. Tomorrow I will take it to machine shop to...
  12. 99kon

    My 1990 build!

    How I bought it Tint and mirrors and debadge Started sanding her down! Got tired of walking around in the mud so i loaded her up and took her to my buddies car lot. I decided to stop work on paint and concentrate on drop and motor swap. Well it started as just drop but then i saw...
  13. 99kon

    My 1990 build!

    How I bought it Tint and mirrors and debadge Started sanding her down! Got tired of walking around in the mud so i loaded her up and took her to my buddies car lot. I decided to stop work on paint and concentrate on drop and motor swap. Well it started as just drop but then i saw...
  14. 99kon

    5/7 drop shock problem

    If you look close at the rear you will see the white shock hanging there. I used a McGaughey's flip kit. My pinion angle is perfect, i know that in order to get that the diff had to rotate. My driver side shock is compressed and the passenger side as you see wont reach the bracket on the diff...
  15. 99kon

    1990 5 speed SCSB. ?? On 6.0 swap

    Will my 5 speed trans bolt up to the 6.0 block that I have? How about the flywheel?
  16. 99kon

    New to the site!

    Just bought this last Friday 9/10! 1990 SCSB 5.7L 5 speed Power locks and windows Completely stock never been touched! Got big plans for this truck. My very first truck was a 1990 SCSB 5.7L 5 speed. Messed up and sold it. 11 years later and i got me another one to play with! Here is...
  17. 99kon

    Instrument cluster swap???????

    Got a 1990 with a cluster with no tach and no needle gauges. Can I swap a cluster with a tach and needle gauges? I know it will fit but will the connection fit?

Latest posts

Staff online

Members online

... and 18 more.
Total: 1,663 (members: 68, guests: 1,595)

Forum statistics

Threads
64,460
Messages
1,394,612
Members
51,722
Latest member
phillies11793

Share this page

Top