Search results

  1. H

    Weird door pin bushing issue

    Dealer couldn't help me either. He called GM parts and they told him it was a mid 2000 rolling change... Apparently you have to buy the whole hinge which is $190 or something like that... I just drilled the hinge to accept the normal bushing. I did purchase GM bushings to use.
  2. H

    Weird door pin bushing issue

    Old post but has anyone found a replacement for the smaller lower hinge bushing? I pulled a set of doors from a 99/2000 Denali to put on my 99 Z56 Tahoe. My original doors take the same Dorman 38416 bronze bushings with pins top and bottom. The Denali doors take a 38416 on the top hinge but they...
  3. H

    Will a '93 Suburban front clip fit a '97 W/T

    In short, yes it will bolt on BUT you are going to have to do some wiring on the headlights to go from the sealed beam to composites but that's pretty simple. Your biggest problems going to be straightening that frame, especially the drivers side. It took a good shot there. If you're handy with...
  4. H

    Facelift for my Z56 Tahoe

    I agree. He pulled that one off really well. I was building my old eclb at the same time as he built his back 15 years ago. Here's my old truck.
  5. H

    Facelift for my Z56 Tahoe

    Thanks guys. I'm not a big fan of the stock Escalade/Denali bumpers. The 800 series bumper gives it more of a truck look IMO. It was fairly simple to adapt but I'm still not happy. I want to raise it up another inch to eliminate the gap as much as possible...
  6. H

    Facelift for my Z56 Tahoe

    I had this 00' Denali clip laying around for a couple years now. It originally was intended for my 89' ecsb but plans changed with that truck and I parted it out. The front clip on my Tahoe has seen better days(literally not one straight panel on the front) so after finally installing all new...
  7. H

    Looking at getting a door/pillar mounted spotlight... anyone else?

    Old thread but if you're still looking, I recently removed the dual spots from my 99' Z56 Police Tahoe. They mount on the a pillar and you have to notch the outer door skin. If your interested in them, shoot me a pm and we can figure something out.
  8. H

    found my old truck...

    Wow... Found this pic from back when I bought it then a couple weeks later when the Caddy front went on...
  9. H

    Nobodys94 Daily driver (slow project)..

    http://centerlinewheels.com/wheels_detail.php?sw_id=358
  10. H

    Nobodys94 Daily driver (slow project)..

    I bought mine used for $600 with like new tires. I needed a 1/4" spacer in the front so I could run the center cap
  11. H

    Nobodys94 Daily driver (slow project)..

    Looks sweet... I wish I kept my smoothies. Here's my Caprice wagon with them on it.
  12. H

    found my old truck...

    You are 100% right. The truck cosmetically looked like ass but I overbuilt the frame when I did the stockfloored bd, all fuel and brake lines were replaced with stainless, 1/2" stainless hardlines for all the airride, custom built stainless fuel cell, etc... It just needed minor body work and paint
  13. H

    found my old truck...

    He had the parts off the truck to put a new fuel pump in and repair the wiring for the front solenoids that was chewed up by a mouse or something. Truck was inside, parts were outside, scrappers saw it and grabbed the parts that were outside while he was at work. He already bought a Denali clip...
  14. H

    Question for the Esky/Denali front end guys

    My first one I bought new over the counter at the Caddy dealer. I never did fill the holes, couldn't make my mind up on whether to make cladding for the rest of the body or not. Shame you aren't near NJ, I'm looking for another clip.
  15. H

    found my old truck...

    Thanks. :-) I put the Escalade front on in 2002 when it still had a 5/7 drop, then stockfloored it over the winter. I was glad I went with the Sierra bumper because the caddy bumper wouldn't lay out. The hood naturally uses Buick hinges. It was a pita to get it right and even then the hood...
  16. H

    found my old truck...

    Here is how it sits now. Bed and original caddy front clip were stolen from the guy. He is starting to rebuild it now. Underhood it's pretty much the same as when I had it except for a ghetto bag replacement and it got really dirty. The jet hot coated headers took a ...
  17. H

    found my old truck...

    Believe me, I tried...
  18. H

    found my old truck...

    I had to sell my 91' Sierra back in 2006 to pay for a bitter custody battle. I won the case but lost my truck. After I sold it, the truck vanished. Friends reported seeing it getting thrashed but I never saw it since the day it left. A friend sent me a text saying he thought he found my old...
  19. H

    Bagged downpipe pics: how are able to lay

    When I did the stockfloor bd on my old GMC, I did exactly the same thing with mine. Never had an ounce of trouble and it also solved the clearance issues I was encountering with reusing the column shift linkage and trying to route a pipe thru there with 3 1/2" less room. I used a universal 2...
  20. H

    new old face

    Here's the only pic of my Suburban... :-(
  21. H

    new old face

    91 Sierra under construction Current 89' Silverado project as bought. only 69k miles tearing down for rebuild Cleaning up frame 94+ GMC grill mockup
  22. H

    new old face

    Hi guys, I'm Joe! I'm new here but not to the GM T400 platform. Some of the older guys that have been around awhile might remember me from FSC as "Bagged91" and later as "Bad71burb". My previous trucks were a customized 88' K2500 ext. cab lb, small lift, 35 x 12.50's, carb'd 383, built 700r4...

Latest posts

Staff online

Members online

... and 23 more.
Total: 1,717 (members: 73, guests: 1,644)

Forum statistics

Threads
64,460
Messages
1,394,612
Members
51,722
Latest member
phillies11793

Share this page

Top