Search results

  1. J

    Upgraded mirrors and need some help with wiring

    I just picked up some of the 94+ mirrors that are powered and have heat defrost in them. I have a 91 and was wondering if anyone had any suggestions of how i can wire these things up! Thanks
  2. J

    How to wire heated and power mirrors in 91 chevy

    I picked up some power and heated mirrors and was wondering if anyone would have any ideas of how to make these things work before I give it try. Thanks!
  3. J

    What Grille is This????

    Just wondering if any of you guys have any idea of what this grille is. I really like the look but have no clue what it is. Thanks
  4. J

    Hid projector retrofit

    Well I tried to take some pics of it but my phone camera doesn't do a justice....hid with reflector was nothing compared to hid with projectors. I will try to take some pics with a better camera but the output is definitly a lot better. Yeah Im using some generic 35w eBay ballasts but they...
  5. J

    Hid projector retrofit

    So i have been driving for a few days with these things and the output i think is great definitely lights up the road very well especially with the hi's on. Its kinda trippy having a cutoff line everywhere lol But overall I'm very happy with the ease of the install and the output of the...
  6. J

    Hid projector retrofit

    So i have got everything done and installed heres a pic of the cutoff still have a little adjusting and tweaking to do but here yah go And for the bixenon wiring i decided that i don't want my halogens to come on at all so i just left the bulbs in as dummies and did the hi 4 mod. Doing the...
  7. J

    Hid projector retrofit

    I did end up doing the color mod to add a little blue to the top of the cut off. Cant really tell what it did cause i don't have the right bulbs yet lol should be good tho And for any guys wanting to do a retrofit i definitely recommend Theretrofitsource.com as a place to buy. Quick responses...
  8. J

    Hid projector retrofit

    Alright so these do require cutting for the obs trucks just because the housing is so damn small. So what i did was cut a hole in the back that fit the projector perfectly and installed it from the back as seen in the 4th picture. I didnt have any of the hardware on it yet but i used four small...
  9. J

    Hid projector retrofit

    I turned them on and the cutoff was kinda of rounded and I'm not really sure of what to do about that... If you have any clue of how I could flatten it out it would be appreciated.
  10. J

    Hid projector retrofit

    Update Got both the lights mounted and put together minus the outside lens. Shrouds cut and mounted everything is good to go just have to clean up them up and seal everythkng.
  11. J

    Hid projector retrofit

    So I finally got the urge and went for it. I bought new housings and morimoto h1 bixenon projectors to go with my current hid set up. Started on it but still got quite a bit of work to do. Here's some pics
  12. J

    What do you think?

    Sorry bro I just always thought that if you are getting cold air instead of warm air you are getting more air per volume because of the density of the air, thus getting more out of a single combustion. For example you have a fire and if you close the damper and it doesn't burn as well as it...
  13. J

    What do you think?

    I just got a better angle and was able to get the heat shield enclosure away from the engine heat and just a better place with more room to fit everything nicely.
  14. J

    What do you think?

    Well a cold air intake is isolated for the most part from the rest of the engine bay thus sucking in cold dense air through the grille where as in a open element with cowl induction is open to the engine bay sucking in warmer air getting not as good of a combustion.
  15. J

    What do you think?

    No its just the k and n So basically a home made cold air intake and heat shield
  16. J

    What do you think?

    Yeah I flipped it backwards and did a little slit on the two bumps that hold it in place at the base on the inside and folded them up and made it smooth with the rest of the base of the aircanister. I'll get some pics of it But the pipe is just regular 3 inch abs. The oval off the stock...
  17. J

    What do you think?

    No its just the K&n i cleaned the old air housing and modded so it would fit then sealed it all up.
  18. J

    Pic Request: White truck, black grille.

    Heres mine
  19. J

    air intake tube

    Heres what I did Connected to stock air lid with a 4 to 3 inch rubber pipe coupling, piece of 3 inch abs about a foot long with a 45 street elbow on the and connecting to a k&n filter.
  20. J

    What do you think?

  21. J

    Whats the best option??

    I had 1.5 crank with helper leafs in the rear about 1 of lift and ran 325/60/18s with light trimming on the bumper and they fit fine. No rubbing
  22. J

    The Stupid Engine Questions Thread

    Cel-check engine light? Theres no code or engine light just at idle it seems to misfire for a couple of seconds and stop.but only sometimes. I changed the cap rotor plugs and wires I'm stages and it went away after installing the plugs but came back after about 5 days of driving. I...
  23. J

    The Stupid Engine Questions Thread

    What is a misfire and what does it feel like inside the vehicle at idle? I think this might be something that's wrong with my truck. Thanks
  24. J

    Whats the best option??

    Check these out http://www.summitracing.com/parts/SUM-7810013/?image=large Streetsideauto.com Gap guards are really easy to make at home and cheap
  25. J

    Whats the best option??

    Personally I would go with option b. A body lift can look pretty good if you put the time into it with painting the frame and gap guards and relocating bumpers. Then if you want to level it out you can crank stock keys a good 1.5 to 2 inches....leveling keys are just reindexed keys that are...

Latest posts

Members online

... and 12 more.
Total: 1,725 (members: 62, guests: 1,663)

Forum statistics

Threads
64,483
Messages
1,394,814
Members
51,763
Latest member
iragsdale

Share this page

Top