Search results

  1. Brantly

    Pilot Bearing Orientation

    okay sorry for the bad quality pics but thanks for your reply, i was thinking that about the seal too, it wouldnt make sense to have it facing the engine because there is nothing there to need to be sealed from
  2. Brantly

    Pilot Bearing Orientation

    so this is how the other bearing was in the crank, i know its hard to see but it seems the opposite way? the part im worried about is the seal being the right direction
  3. Brantly

    Pilot Bearing Orientation

    I have a 98 1500 with the nv3500 and its been awhile since ive replaced the clutch including the pilot bearing, i was wondering whoch side of the bearing goes towards the engine? there doesnt seem to be a taper on either end thanks guys.
  4. Brantly

    A/C problems

    the compressor also makes a sorta whining noise when running like a bad bearing or something and when the clutch disengages and stops spinning it kinda makes a pinging noise that really noticeable. The compressor was prefilled with 3oz of oil so im not sure if it needs more oil or if its...
  5. Brantly

    A/C problems

    So my 98 hasnt had A/C working in years. The clutch on the compressor wasnt engaging so i got a new compressor (yes i know it couldve just been the low pressure switch but decided itd be nice to get a new compressor anyways).I got a new freon pressure senor the one on the back of the compressor...
  6. Brantly

    Front differential swap

    this is the one im trying to instal which is a 91'. my stock diff in my 98' does not have the extra wire and connection on top and i will have nothing to plug it into
  7. Brantly

    Front differential swap

    this is the one im trying to instal which is a 91'. my stock diff in my 98' does not have the extra wire and connection on top and i will have nothing to plug it into
  8. Brantly

    Front differential swap

    Im fairly green on these parts in terms of what they look like and such. Is there any way you could give me a Ppart number or website i could find these on?
  9. Brantly

    Front differential swap

    How do i take out the axle shaft to get it off?
  10. Brantly

    Front differential swap

    Okay ill try it today, thanks for the input
  11. Brantly

    Front differential swap

    So theres two connections on the older diff and my stock only has one, do you mean swap the big solenoid looking thing from my new one? Because the other connection is something that almost looks like a temp sensor but it has a button on the end of it and im not sure what it actually is.
  12. Brantly

    Front differential swap

    So theres two connections on the older diff and my stock only has one, do you mean swap the big solenoid looking thing from my new one? Because the other connection is something that almost looks like a temp sensor but it has a button on the end of it and im not sure what it actually is.
  13. Brantly

    Front differential swap

    I bought a 8.25" from a 1992 k1500 PU to put into my 1998 k1500 PU because the gears match my rear. I realized after buying it that the 92' diff that i bought has what i believe to be a thermal actuator or some kind of actuator that my stock 98' differential does not have which means there is an...
  14. Brantly

    Posi Rear End

    thanks everyoje for the advice, decided to scrap the yukon posi and get a tru track instead, keep hearing too many bad things about the yukons!
  15. Brantly

    Posi Rear End

    Thanks for the reply! This is the kit i bought https://www.summitracing.com/parts/yga-10400 i believe it comes with all the bearings ill need and it says with shims too but could it be crush sleeves? or would it specifically say if it did. id much rather have the shims
  16. Brantly

    Posi Rear End

    Hey guys, im about to be putting a yukon posi traction carrier and a 4.88 ring and pinion and all new bearings plus seals in my rear end tomorrow. I think i understand the use of the shims in order to get a good connection with the gears and the backlash correct, do you guys have any dos and...
  17. Brantly

    6" lift vibrations

    forgot to mention im running 35"s
  18. Brantly

    6" lift vibrations

    Just installed 6" rc on my 98 k1500, i have stock gearing in the rear end which i believe is 3.83. not sure if its gearing causing the vibration but at any speed it feels like rear end is bouncing. Im unsure if something is loose, the gearing is just causing weird tire rotation, my tires are...
  19. Brantly

    14.5" wide tires

    I have a 6" lift on my 98 k1500, I found a cheap set of 36"x14.5r17 tires and was wondering if anyone is running this tire size on a 6" lift? If so do you have any problems and how much trimming did you have to do?
  20. Brantly

    Rough Country 4"/6" kit install tips.

    I'm currently installing the 6 inch on my 98K 1500 and I have the front dif bolted up to the drop brackets and the fins are ground down so that it's not hitting the stock lower control arm bracket, but for some reason the driver side of the dif is about half an inch higher and from the front the...
  21. Brantly

    Please help body lift removal issue

    f found another issue, my frame is twisted to all hell haha, so even with those off its a little off still but oh well
  22. Brantly

    Please help body lift removal issue

    are you referring to the radiator core? if so then no because i wasnt sure if anything was changed from stock when the kit was put on, i'll check that out today
  23. Brantly

    Please help body lift removal issue

    1998 Chevy k1500 standard cab short bed. Im taking off the 3" body lift and i have taken all aftermarket brackets off and have lowered the cab body down but the front cab bushings have about a 1" gap until its touching the body. Its almost as if the body is catching or hung up somewhere near the...
  24. Brantly

    Reversing a Body Lift

    Does anyone know if the bolts used for the body lift will still thread on and fit when the blocks are taken off?
  25. Brantly

    Reversing a Body Lift

    I had a buddy say something about the radiator mounts would also need to be replaced, do you know anything about that?

Latest posts

Members online

Total: 1,225 (members: 19, guests: 1,206)

Forum statistics

Threads
64,351
Messages
1,391,915
Members
51,471
Latest member
Jake rogers

Share this page

Top