FLGS400
I'm Awesome
That sucks about the spindle interference. First I heard of that. But to be fair, never really looked into those ones, went with Belltechs knowing about the pushing the wheel out a bit "issue". Only issue I had with them was one hole not being tapped all the way through. Easy fix.
I believe "Eric the car guy" on YouTube used those when he lowered his. Maybe check out the video and see if he had an issue as well.
Thanks for the reference Drunkcanuk! I went back and watched the 4-parts to the front end rebuild. While he did not have that same issue, I noticed his spindles (same ones) rubbed the under side of the upper control arm on full suspension extension. Mine do too, though not as bad as his did. I'm going to do some clearance grinding next.
I did call McGaughy's this afternoon about the interference with the dust shield. Their technical person advised me to cut the shield to fit or leave it out entirely. So be it...