GarrettGmc's 94 ecsb

GarrettGmc · Jan 13, 2019

Finally picked up a set of head studs while at summit racing yesterday.

You must be registered for see images attach

canadakustom · Jan 13, 2019

Glad you decided to ls swap it . I just finished doing one in my 98 and couldnt be happier with the power gains from my 305 vortec.

GarrettGmc · Jan 13, 2019

It's been a long ordeal but me and the wife made a list of things to get done around the house this year and the truck is on the list to be done before new years.

GarrettGmc · Jan 22, 2019

So summit dropped off another box for me today, new rockers, bolts an oil pan gasket. So went out to the shop to try agian at drilling out the broken exhaust manifold bolt and the snapped extractor. Welllll an hour later and 2 more broken drill bits I've barely even made a mark in the extractor. Brand new bits, sharpened bits nothings was working. Gunna take the head into work and see what our bolt remover will charge me

GarrettGmc · Feb 2, 2019

An today FedEx dropped off another box for me

. I ended up ordering a new head since the price to get the other one drilled out by out bolt remover was ridiculous, his house burnt down as well as his entire shop and work truck so hes slowly building up his new shop but means he has to charge more. Oh well. So I started putting the studs in but only got one side done, new tattoo apt. Once I get back home I'll button her back up.

You must be registered for see images attach

gstubbz · Feb 2, 2019

I need to stop by again and check your progress out. You're definitely further along! Too bad I'm not closer so I could come up and help you out a bit.

Sent from my iPad using Tapatalk Pro

GarrettGmc · Feb 2, 2019

Coming along

You must be registered for see images attach

GarrettGmc · Feb 18, 2019

Got both the heads on and have finally started with the wiring since the weather last week was crazy, 6 inches of snow which is the most snow in 51 years around here. Separated the engine and trans harnesses an depinned the entire pcm labeling every wire. I plan to note every sensor with how many wires go to it, color of wires and what number they plug into. Holding off on ordering anything real big right now since my oldest boys bday is in 2 weeks an we picked up a new TTR50 for him but I should be buying set of dirty dingo mounts this weekend.

You must be registered for see images attach

454cid · Feb 18, 2019

GarrettGmc said:
Got both the heads on and have finally started with the wiring since the weather last week was crazy, 6 inches of snow which is the most snow in 51 years around here. Separated the engine and trans harnesses an depinned the entire pcm labeling every wire. I plan to note every sensor with how many wires go to it, color of wires and what number they plug into. Holding off on ordering anything real big right now since my oldest boys bday is in 2 weeks an we picked up a new TTR50 for him but I should be buying set of dirty dingo mounts this weekend.
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Wow, that's a lot of wire!

GarrettGmc · Feb 18, 2019

454cid said:
Wow, that's a lot of wire!

Abt 160 wire give or minus including the fuse block wires. An I'll still have to wire in the Dakota Digital dash when I buy it.

GarrettGmc's 94 ecsb

GarrettGmc

I'm Awesome

canadakustom

Newbie

GarrettGmc

I'm Awesome

GarrettGmc

I'm Awesome

GarrettGmc

I'm Awesome

gstubbz

Hi I'm Gavin and I have an OBSession

GarrettGmc

I'm Awesome

GarrettGmc

I'm Awesome

454cid

Sooper Pooper

GarrettGmc

I'm Awesome

Similar threads

Latest posts

Members online

Forum statistics

Share this page