someotherguy's latest activity
-
Usually a bad blower resistor but need check blower motor switch I've seen them burnt up and connector melted -
someotherguy replied to the thread Jacking under diff question..The F450SD wrecker I drive actually has a factory bottle jack wing-nutted behind the seat. First one I've ever seen without a "jack...
-
-
someotherguy replied to the thread Dually wheel install sequence.The dually wheels are hub-centric, vs lug-centric. They fit fairly snug to the hub, you'll notice a "ledge" for lack of a better term...
-
someotherguy replied to the thread Broken shifter cable?.The 95-up column's shifter mechanism is a bit weak, as most have found out when their brake-to-shift-interlock solenoid starts giving...
-
someotherguy replied to the thread Code 43- Master relay open or grounded.Don't give us too many details, LOL.. like, year, model, engine, any symptoms related, any work done prior to this situation? What book...
-
someotherguy replied to the thread Pinging alot with 89.Came here just to say this and you beat me to it. It can be tricky getting the correct EGR for these TBI engines though and the parts...
-
My issue was a bad EGR valve that caused pinging in my engine. Don’t overlook that.
-
someotherguy reacted to Frank Enstein's post in the thread Champion Radiator Install Question with
Like.
They don't need to be plugged but it won't hurt anything either. If you plug them and in the future you do more towing nobody will have... -
That's the engine oil cooler. When I installed a new radiator, I just left the plastic shipping plugs in place, since I wasn't going to...
-
someotherguy replied to the thread Help on 8 lug conversion on my c1500.Just grab the forged uppers from the 8 lug truck. They bolt right in, as I said, and you won't have to battle with drilling out ball...
-
someotherguy replied to the thread Instrument Panel Cluster Lights.You have now seen up close and personal why these suggestions are made. :) Richard
-
Ok, after plugging it back in WITHOUT the T-connector everything works. The only thing not working is on remote start the running lights...
-
someotherguy replied to the thread Instrument Panel Cluster Lights.If you have a trailer harness start by disconnecting it during troubleshooting. It sounds like your left signal wire is shorted with...
-
someotherguy replied to the thread Brake light switch.No adjustment in GMT400 brake light switches 1994-up. 1988-1993 must be adjusted after install. Is the switch properly clipped over...
-
Here ya go guys! You asked for a pic of it loaded and here ya go!! lol Went and picked up this old 1984 C20 Railroad repair service...
Latest posts
-
-
-
Need help with a 97 5.7 liter not getting spark
- Latest: 1998_K1500_Sub
-
Key spins freely in driver door and won't lock or unlock.- Latest: Frank Enstein
-