Recent content by SixPointTwo

  1. SixPointTwo

    Weird light issue

    No I didn't, I just unplugged it
  2. SixPointTwo

    Throwout bearing for 5.3 swap

    I'm currently dealing with this: http://www.gmt400.com/forum/showthread.php?32552-Throwout-bearing-won-t-go-on-clutch-fork! But the rep at Summit Racing thinks my Exedy clutch came with the wrong throwout bearing and that I should get this one instead (which is listed as fitting my truck)...
  3. SixPointTwo

    Throwout bearing won't go on clutch fork!

    Actually one thing I did notice is I slid the throwout bearing onto the input shaft and it wasn't tight, it jiggled around, it should be tight on the input shaft shouldn't it? There's like 1/16" gap between the input shaft and the throwout bearing...which also seems to be how much too big it is...
  4. SixPointTwo

    Throwout bearing won't go on clutch fork!

    I see what you're saying but I'm putting it on exactly how it's supposed to go on and I'm telling you there's no way this thing is going to work! I think I might have to chock this up to poor manufacturing on the fork, I may have to take a flapper wheel and slightly grind out the inside of the...
  5. SixPointTwo

    Throwout bearing won't go on clutch fork!

    Which flat spot are you referring to? This video shows exactly how it goes on and this guy does it with his hands but I couldn't get it to go on with a hammer! https://www.youtube.com/watch?v=e4e8P0fFltk
  6. SixPointTwo

    Throwout bearing won't go on clutch fork!

    I'm pulling my hair out over this! Both are for a 1992 5LM60 transmission. Throwout bearing came with my Exedy 04128 clutch kit, clutch fork is an AMS CF126, which should fit. It fits the transmission perfect. This is the problem: The fork is too skinny for the throwout bearing...
  7. SixPointTwo

    My Big Green '95 ECSB build!

    I got my clutch kit today! also got a new clutch fork and pivot ball. My buddy ordered a new grille a while back and it came broken down by the drivers turn signal. He contacted them and they sent another for free. So he, being the coolest best friend ever, gave me the nice one as a...
  8. SixPointTwo

    Checklist for carb swap

    He got back to me, the heads are 441's with 2.02/1.65
  9. SixPointTwo

    Checklist for carb swap

    He's getting a TPS kit for the Edelbrock so the tranny will have signal Also I've had nothing but success with Edelbrock, if it turns out ty then we'll grab a a Holley but for now an Edelbrock will do just fine The regulator is a return style so we already got that taken care of Like I said...
  10. SixPointTwo

    Checklist for carb swap

    I'm posting this for a buddy. We're converting his TBI to carb and I wanted to make sure that we have absolutely everything we'll need to swap it over so we can do it all in one shot. It's a '93 K1500 4x4 pickup. He's bought some refreshed pre-87 heads (don't recall the casting number, I...
  11. SixPointTwo

    Weird light issue

    Hmm okay I'll check it out, thanks!
  12. SixPointTwo

    Weird light issue

    Do you know where the connections are in the truck?
  13. SixPointTwo

    Weird light issue

    My interior lights have never worked...check the fuse and its blown. Put a courtesy fuse in it and the interior lights work. Great. But, now when the door is closed, the third brakes turns on even with the truck and lights off...open the door and the courtesy interior lights turn on and third...
  14. SixPointTwo

    5 speed swapping my truck, question about clutches...

    That's what I figured it'd be. The only difference I noticed was the two small rings or bearings, what are those? The one almost looks like a pilot bearing
  15. SixPointTwo

    My Big Green '95 ECSB build!

    If anyone can help with my clutch question I'd appreciate it! http://www.gmt400.com/forum/showthread.php?t=32323
See more

Latest posts

Staff online

Members online

... and 12 more.
Total: 1,704 (members: 62, guests: 1,642)

Forum statistics

Threads
64,363
Messages
1,392,151
Members
51,486
Latest member
kejty2-Zymcot-vythit

Share this page

Top