Recent content by koke

  1. koke

    4l60e-4l80e

    mines a 94 1500 ecsb, this only needs to last me a year than i want to look at a 12valve swap. i found a drive line that works! now just need to do a little wiring and she'll be back on the street
  2. koke

    4l60e-4l80e

    yea i was afraid that it would probaly come down to that, i already have one for the front that works
  3. koke

    4l60e-4l80e

    Ok i have the 80 in, wired and swapped out the input shaft on the T-case (friggen snap rings!!!!) went to put in the drive line and its hitting the out put seal, need a shorter one, and ideas on the one that i would need? it only needs to be about an inch and a half shorter
  4. koke

    4l60 to 4l80 swap

    you'll probly have to split a 241 to change out the input shaft, 4l80e's output is larger than the 60's, but since your going to do a solid swap, look for a 241 from a 6.5l or larger pickup/surban that already has a solid front. kinda hard to find but they made 241's with passanger side drop
  5. koke

    Wynjammer SC or 6.0 swap?

    check with dirty dingo, GREAT brackets at a pretty decent price, allows you to use all your old accesories
  6. koke

    Supercharged their truck?

    If anyone is intrested, look on montana's craigslist, there's one in kalispel for 750, its a whipple and the only thing it needs is a tensior. not sure if the stock one would work, and its kinda an odd design, the throttle body is mounted on the back, cant be a whole lot of room back there under...
  7. koke

    swap time, but first might need a little help

    its a 94 tbi, the only thing i can think of having to be wired on the pickup would be break, tach, and key, but yet again i could be wrong. and yea thats a great site!! I will be sending my ECU to him
  8. koke

    swap time, but first might need a little help

    haha i would love to have a T56!! or an 8l80e haha but now were talking some money! i'll give the 4500 a go. i'll have pictures posted tommrow, gonna be a nightmare working this wire harness ahe?
  9. koke

    swap time, but first might need a little help

    Haha yea small world indeed! lol and i got mine off of a near by reservation, and THANK YOU SO MUCH!! to tell you the truth, the same guy i bought the motor from wants me to trade him stright across a 700r4 for a NV4500, any take on the 4500? i wouldn't imagine the ls being to much, but i have...
  10. koke

    swap time, but first might need a little help

    Well got my motor today, and it looks clean!! so here is another thing that came up, its an 04, but has a newer motor (32,553 mile) and it has aluminum heads?? i thought they put cast on the truck blocks? and has anyone used the fuel pump from street and proformance? the one that has a feed and...
  11. koke

    swap time, but first might need a little help

    ok i tracked down a 5.3l out of a 04 tahoe, 600$ for motor, harness, and ecm (only 32,000 miles!!!) not a bad snag, but no tranny. i will probley track down a 4l65e but does anyone know if the ls ecm has trans control? i really dont want to do a stand alone harness just for a tranny, and i...
  12. koke

    Timing HELP

    still doesn't fire?! make sure you have the firing order right, also check to make sure your getting fuel and spark and everything has been hooked back up, only other thing i can think of would be a intake leak but as long as you used new gaskets, and cleaned the mating surfaces good that...
  13. koke

    Hesitation at partial throttle

    haha i don't think you would own another tbi motor!! something tells me your well content with your 6 oh
  14. koke

    Hesitation at partial throttle

    so in other words deleated? lol or did you clean/replace? kinda curious because yes tbi's are very famous around where i live to take a dive
  15. koke

    Hesitation at partial throttle

    haha yes this is why i said "supposed" but even with a stuck open EGR there is pretty little exhaust that recirculates on these pickups, and yes everything else is valid, but i was figuring with a rebuilt block that the timing could be off, some people (like myself) get excited and time by ear...
See more

Latest posts

Members online

... and 10 more.
Total: 1,896 (members: 60, guests: 1,836)

Forum statistics

Threads
64,383
Messages
1,392,675
Members
51,530
Latest member
anglebeef

Share this page

Top