Changed powersteering pump and all good. Now brakes and steering is easy. Fluid is tan milky though. Jacked up front and sucked all fluid out of pump and keep turning the to try to get all out. Then filled it again and still the same. Works though
Sent from my SM-G973U using Tapatalk
Finally got to put the kit in the truck but it didn't work with the stock harness plugged in.Only when I plug the ebay bypass piece in it shift through all the gears manually.
Sent from my SM-G973U using Tapatalk
Going to order solenoid and hope for the best. If its that I can plug the stock harness back in and back to regular shifting.
Sent from my SM-G973U using Tapatalk
Reverse is working. The truck shifts from 1-2 good and 2-3 nothing and 3-4 nothing. From the chart it looks like the 2-3 solenoid needs to be energized so 3rd and 4th will engage. It looks like that will be a bad solenoid or is there something else inside the trans that tells the solenoid to...
It has reviews that it works. You have to manually shift up and down. Its not a computer controlled it doesn't shifts like the stocker and "fast" type.
Sent from my SM-G973U using Tapatalk
I bought a 97 7.4 crewcab dually and it doesn't shift from 2nd to 3rd so I bought this to bypass computer and sensors. I had a 93 extended cab dually that I had hell with the trans not shifting and wanted to narrow it down to the basics on this one. The seller says it doesn't need the two speed...
Just get the 94 and up mini starter. I installed one on my 93 454 it had a broken ear on the block and I would have to get under the there to realign and tighten. Put the mini starter and never had to do it again and was alot easier on my arms installing it. The clearance from the manifold was...
Hello I recently found a crewcab dually and had so.e problems. Changed starter and waterpump and that part is good but the power steering and brakes are not being assisted "very hard steering and breaking". Im guessing it can be only two things pump, hydoboost or ?. Any help will be appreciated...