Recent content by densobro

  1. densobro

    Horn problems

    I couldn’t thank you enough for the in-depth help, I will for sure check for all of this Monday when I’m off work and let you all know what I come up with, thanks again!
  2. densobro

    Horn problems

    Also do those two green wires come from the single positive red wire that’s protected to the right or the bigger protected bundle of wires to the left? Kinda hard to make out the location the green wires are coming from
  3. densobro

    Horn problems

    Ah I found a female end plug that with a green wire that doesn’t fit in the the original plug, may be because of the wrong harnesses installed years ago (I heard they rebuilt the truck using parts from a different truck). When I rig the plug to work with the horn plug nothing happens until I use...
  4. densobro

    Horn problems

    Just found a way to test the relay and it does work, I can hear it clicking.
  5. densobro

    Horn problems

    Also when I use a jumper wire like this from the relay ports directly to the plug with no home, the horn works. But with out the plug plugged in, I can’t really verify if the relay works.
  6. densobro

    Horn problems

  7. densobro

    Horn problems

    I would really appreciate that. I’ve been almost to the point of going to my neighbors house (who I’ve never met, but has the same year truck) and asking them if I could look into their engine bay to see where their plug goes haha. Probably not the best way to introduce myself. And I followed...
  8. densobro

    Horn problems

    Thanks for the reply and the diagrams. I check the ground wires you’re referring to and remembered I replaced those about 7 months ago back when I had a starter issue. I’m 100% sure my horn issue is due to the plug not being hooked up. The plug has a solid green wire (which goes directly to the...
  9. densobro

    Horn problems

    Also can’t find a wiring diagram that shows this circuit
  10. densobro

    Horn problems

    horn hasn’t work since I got the truck back in 2020. It’s a 1996 gmc k1500. The horn works when rigged up to a dewalt 20v battery, and is directly plugged in, but when I trace the wires further down, I see another plug close to the fuse box under the hood that isn’t plugged up and I can’t find...
  11. densobro

    Rear gear ratio reprogram

    yes the rear gears have been changed to 373 before I bought the truck and the speedo reading is way off
  12. densobro

    Rear gear ratio reprogram

    So my boss today let me borrow his otc encore can tool. He says it can be used to reprogram rear gear ratio in vehicles and I can’t figure out how to find that setting for my 1996 gmc k1500. Does anybody else have experience with this tool?
  13. densobro

    Cluster speedo not accurate

    Yes 4l60e brand new from GM. And the tires are standard size for the truck. I definitely need to get this fixed soon because my odometer is climbing fast and I got a 100,000 mile warranty for the motor and tranny
  14. densobro

    Cluster speedo not accurate

    Yeah I emailed them and asked them what all would I gain from their tune. And my Spedo problem. This was their reply Once I figure out the gear ratio, I can let them know and I’ll have the problem fixed, along with some better performance and mpg. Just gotta save up money for that..
  15. densobro

    Shaky Idle

    Any update?
See more

Latest posts

Staff online

Members online

... and 18 more.
Total: 1,694 (members: 68, guests: 1,626)

Forum statistics

Threads
64,496
Messages
1,395,220
Members
51,823
Latest member
Fish98C2500

Share this page

Top