Recent content by Brice Edwards
-
454 swap
Alright cool. Thats what's I needed to know. thanks- Brice Edwards
- Post #6
- Forum: Engine Performance + Maintenance
-
454 swap
I have the harness and computer. So what your saying is that the 97 harness won't plug into the 98 truck without modification- Brice Edwards
- Post #4
- Forum: Engine Performance + Maintenance
-
454 swap
hey everyone. I got a 98 k3500 cclb with a 350 and I'm looking to put a 454 into it. The 454 is out of a 97 k2500. What I need to know is will the harness and computer plug in to the 98 without issue? looking to do the swap as cheaply as possible.- Brice Edwards
- Thread
- Replies: 5
- Forum: Engine Performance + Maintenance
-
Turn Signal Wiring issue
Normally does it whenever I turn the key on but I just tried it again and it didn't happen- Brice Edwards
- Post #7
- Forum: Audio + Electronics
-
Turn Signal Wiring issue
It also drops voltage considerably when the parking lights are turned on- Brice Edwards
- Post #5
- Forum: Audio + Electronics
-
Turn Signal Wiring issue
All other lights work and light up fine. Just the Driver side blinker stays lit and always blows the fuse. I believe the last time I checked it out the light on the dash stayed on even with the lights unplugged- Brice Edwards
- Post #4
- Forum: Audio + Electronics
-
Turn Signal Wiring issue
1998 K3500 I've had a problem with my turn signals the past year and I'd like to finally solve it. On the cluster when the parking lights or headlights are on the left blinker stays lit on the dash It continuously will blow the signal fuse and the signals do not work at all or the hazards. It...- Brice Edwards
- Thread
- Replies: 6
- Forum: Audio + Electronics
-
Vortec 454 Revs up high then dies HELP!!
I sure did, didn't change anything- Brice Edwards
- Post #69
- Forum: Engine Performance + Maintenance
-
Vortec 454 Revs up high then dies HELP!!
no, they're only like that at idle- Brice Edwards
- Post #67
- Forum: Engine Performance + Maintenance
-
Vortec 454 Revs up high then dies HELP!!
I take that back now it runs even worse and has no power, it almost acts like the timing is way off- Brice Edwards
- Post #64
- Forum: Engine Performance + Maintenance
-
Vortec 454 Revs up high then dies HELP!!
I unplugged them both, still no code thrown but it runs slightly better. still definitely rich though- Brice Edwards
- Post #63
- Forum: Engine Performance + Maintenance
-
Vortec 454 Revs up high then dies HELP!!
Would it possibly make it run better with them unplugged?- Brice Edwards
- Post #56
- Forum: Engine Performance + Maintenance
-
Vortec 454 Revs up high then dies HELP!!
yep, positive 25 at idle. is it possible that my o2 sensors are bad?- Brice Edwards
- Post #54
- Forum: Engine Performance + Maintenance
-
Vortec 454 Revs up high then dies HELP!!
Yes I replaced the FPR- Brice Edwards
- Post #51
- Forum: Engine Performance + Maintenance
-
Vortec 454 Revs up high then dies HELP!!
yep, 3 times- Brice Edwards
- Post #50
- Forum: Engine Performance + Maintenance
