The Body Lift Thread

[Smith]

I might do a 2 inch body lift but i had a couple of questions. 1: will it pull to much slack on brake lines, wires, ground straps, etc. 2: wont it effect the 4wd linkage and e-brake. 3: the motor mounts are on the frame so the motor will sit 2 inches lower than everything else, wont that cause some overheating? any help would be great. Thanks

Same answer as the guy gave you on FSC. Cooling will not be an issue as long as you use the include spacers for the Radiator shroud. Only issue i have had is the Parking Brake. The cable is a bit stretched but can be adjusted out

 

[Rewind]

scratch the bodylift for me

FOund a cepek kit
$800 installed

WOW!!!!! You better jump all over that!!!! Wish I could find a deal like that.

 

[JayBo]

So I found the cepek. Spoke with the guy and arranged to buy it Keep calling/texting dude.. No answer/reply.
FML guess Its back to the bodylift.

 

[squeaky3]

So I found the cepek. Spoke with the guy and arranged to buy it Keep calling/texting dude.. No answer/reply.
FML guess Its back to the bodylift.

man that really sucks

my body lift help up great this weekend at the badlands...all the trucks that were there but 1 had a body lift and i am glad i did so i had room for bigger tires and wouldnt hit the body on some of the trails we were on....now if i could just cut the frame down to like half the size i would have been great, so i wouldnt have caught my frame on rocks and stuff while i was there

 

[Greg]

So I found the cepek. Spoke with the guy and arranged to buy it Keep calling/texting dude.. No answer/reply.
FML guess Its back to the bodylift.

That guy needs to learn to not **** with the JayBo

 

[silverado_06]

scratch the bodylift for me

FOund a cepek kit
$800 installed

jay if i see this one more time without results, i'm coming down there to drop a world of hurt.

 

[noremac]

so can i run a 305/75 or 70 on the stock 16 inch rims with a 3" BL?

edit: or a 33x 11.50r16 on stock rims?

 

[Crash]

I would think so, I have 305/70R16 on stock 99 up wheels with the tb cranked 2" or so.

 

[Butch]

so can i run a 305/75 or 70 on the stock 16 inch rims with a 3" BL?

edit: or a 33x 11.50r16 on stock rims?

yeah, a friend of mine in high school ran 36x12.50x15 classic IIs with only a 3" body and keys

my plan is 33X11.50X16 Classic IIs on my '98 with only GK bar sand 3/4 ton springs out back come May/June

 

[noremac]

i think i am gonna run 33's... its proven, and plenty of flex