KnuckleBuster
Newbie
Sorry if this has already been covered
I could not find a topic that covered the problems I’m having. So I did a led light conversion install highs/lows
Switch backs on turn signals and led parking and marker lights on front. To stop hyper flash I tried the heavy duty turn signal flasher No change. I tried the led turn signal flasher with same results. So I then moved on to installing the resisters for front signals. From what I was found I installed one end to ground other to blinker light. Kinda worked, when I put on turn signals except my switch backs were working reverse solid amber and flashing white. When you started the truck they strobed back and forth like police lights the turn signals park and side markers. So I tried to install to what I believe Was believe the parking light wire. All was good. Switch backs functioned as they should no funny glitches hyper flashing fixed!! But the I moved to the tail lights, put the leds in and all the lights start to hyper flash again. So installed the resisters for rear. Hyper flash still there, but now as well as that my park lights turn on when I step on brake pedal and my climate control lights. Maybe even instrument light. So I tried changing wires to the other wire no change. There are 2 grounds a turn signal and brake light wire in my brake lights. This is a 1993 Chevy C1500 ext cab. I’m not sure what to try now. In case your wondering I was using a multi meter not just guessing.
I could not find a topic that covered the problems I’m having. So I did a led light conversion install highs/lows
Switch backs on turn signals and led parking and marker lights on front. To stop hyper flash I tried the heavy duty turn signal flasher No change. I tried the led turn signal flasher with same results. So I then moved on to installing the resisters for front signals. From what I was found I installed one end to ground other to blinker light. Kinda worked, when I put on turn signals except my switch backs were working reverse solid amber and flashing white. When you started the truck they strobed back and forth like police lights the turn signals park and side markers. So I tried to install to what I believe Was believe the parking light wire. All was good. Switch backs functioned as they should no funny glitches hyper flashing fixed!! But the I moved to the tail lights, put the leds in and all the lights start to hyper flash again. So installed the resisters for rear. Hyper flash still there, but now as well as that my park lights turn on when I step on brake pedal and my climate control lights. Maybe even instrument light. So I tried changing wires to the other wire no change. There are 2 grounds a turn signal and brake light wire in my brake lights. This is a 1993 Chevy C1500 ext cab. I’m not sure what to try now. In case your wondering I was using a multi meter not just guessing.